On 29/03/2023 10:32, Delphine CC Chiu wrote:
> From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
>
> Add GPIO names for SOC lines.
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> ---
> .../dts/aspeed-bmc-facebook-greatlakes.dts | 49 +++++++++++++++++++
> 1 file changed, 49 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> index 8c05bd56ce1e..59819115c39d 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> @@ -238,4 +238,53 @@
> &gpio0 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
> + status = "okay";
Was it disabled before?
> + gpio-line-names =
> + /*A0-A7*/ "","","","","","","","",
> + /*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
> + "power-bmc-slot1","power-bmc-slot2",
> + "power-bmc-slot3","power-bmc-slot4","","",
> + /*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
> + "reset-cause-nic-secondary","","","",
> + /*D0-D7*/ "","","","","","","","",
> + /*E0-E7*/ "","","","","","","","",
> + /*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
> + "slot3-bmc-reset-button","slot4-bmc-reset-button",
> + "","","","presence-emmc",
> + /*G0-G7*/ "","","","","","","","",
> + /*H0-H7*/ "","","","",
> + "presence-mb-slot1","presence-mb-slot2",
> + "presence-mb-slot3","presence-mb-slot4",
> + /*I0-I7*/ "","","","","","","bb-bmc-button","",
> + /*J0-J7*/ "","","","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
> + /*N0-N7*/ "","","","","bmc-ready","","","",
> + /*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
> + /*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
> + "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
> + "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
> + /*Q0-Q7*/ "","","","","","","","",
> + /*R0-R7*/ "","","","","","","","",
> + /*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","GND",
> + /*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
> + "bmc-slot3-ac-button","bmc-slot4-ac-button",
> + "","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","","","","","","",
> + /*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
> + /*Z0-Z7*/ "","","","","","","","";
> +};
> +
> +&gpio1 {
> + status = "okay";
Same question...
Best regards,
Krzysztof
