Hi, this is the fifth installement of my series for adding support for the Phytec STM32MP1-based SoM and board. Phytec itself calls the board "Phycore STM32MP1-3" and has other endnumbers. I only have access to the "-3" and that's what this series adds. Changes since v5: - add reviewed/acked-by - cleanup dt_bindings_check warnings Changes since v4: - cleanup usage of "status = okay|disabled" - fix remaining non-generic node names - rework sai nodes to not duplicate the existing settings in stm32mp151.dtsi Changes since v3: - cleanup board-compatible - cleanup aliases - rename nodes according to schema - use interrupt flag Steffen Trumtrar (10): ARM: dts: stm32: Add alternate pinmux for ethernet ARM: dts: stm32: Add alternate pinmux for sai2b ARM: dts: stm32: Add new pinmux for sdmmc1_b4 ARM: dts: stm32: Add new pinmux for sdmmc2_d47 ARM: dts: stm32: Add pinmux for USART1 pins ARM: dts: stm32: Add idle/sleep pinmux for USART3 ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a dt-bindings: arm: stm32: Add Phytec STM32MP1 board ARM: dts: stm32: add STM32MP1-based Phytec SoM ARM: dts: stm32: add STM32MP1-based Phytec board .../devicetree/bindings/arm/stm32/stm32.yaml | 6 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 231 +++++++ .../dts/stm32mp157c-phycore-stm32mp1-3.dts | 65 ++ .../stm32mp157c-phycore-stm32mp15-som.dtsi | 594 ++++++++++++++++++ 5 files changed, 898 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi -- 2.39.1