On 28.03.2023 09:31, Devi Priya wrote:
>
>
> On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote:
>> On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy@xxxxxxxxxxx> wrote:
>>>
>>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>>> family of SoCs
>>>
>>> Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
>>> Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
>>> Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
>>> ---
>>> Changes in V10:
>>> - Renamed the Board Device Tree Source to use the RDP numbers
>>> - Updated the Makefile, subject and commit message accordingly
>>>
>>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>>> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 ++++++
>>> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 ++++++++++++++++++++
>>> 3 files changed, 355 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index 1a29403400b7..52f1f92c5195 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>> new file mode 100644
>>> index 000000000000..2ce8e09e7565
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>> @@ -0,0 +1,84 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * IPQ9574 RDP433 board device tree source
>>> + *
>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "ipq9574.dtsi"
>>> +
>>> +/ {
>>> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
>>> + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
>>> +
>>> + aliases {
>>> + serial0 = &blsp1_uart2;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0:115200n8";
>>> + };
>>> +};
>>> +
>>> +&blsp1_uart2 {
>>> + pinctrl-0 = <&uart2_pins>;
>>> + pinctrl-names = "default";
>>> + status = "okay";
>>> +};
>>> +
>>> +&sdhc_1 {
>>> + pinctrl-0 = <&sdc_default_state>;
>>> + pinctrl-names = "default";
>>> + mmc-ddr-1_8v;
>>> + mmc-hs200-1_8v;
>>> + mmc-hs400-1_8v;
>>> + mmc-hs400-enhanced-strobe;
>>> + max-frequency = <384000000>;
>>> + bus-width = <8>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&sleep_clk {
>>> + clock-frequency = <32000>;
>>> +};
>>> +
>>> +&tlmm {
>>> + sdc_default_state: sdc-default-state {
>>> + clk-pins {
>>> + pins = "gpio5";
>>> + function = "sdc_clk";
>>> + drive-strength = <8>;
>>> + bias-disable;
>>> + };
>>> +
>>> + cmd-pins {
>>> + pins = "gpio4";
>>> + function = "sdc_cmd";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> +
>>> + data-pins {
>>> + pins = "gpio0", "gpio1", "gpio2",
>>> + "gpio3", "gpio6", "gpio7",
>>> + "gpio8", "gpio9";
>>> + function = "sdc_data";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> +
>>> + rclk-pins {
>>> + pins = "gpio10";
>>> + function = "sdc_rclk";
>>> + drive-strength = <8>;
>>> + bias-pull-down;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&xo_board_clk {
>>> + clock-frequency = <24000000>;
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>> new file mode 100644
>>> index 000000000000..3bb7435f5e7f
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>> @@ -0,0 +1,270 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * IPQ9574 SoC device tree source
>>> + *
>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>>> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
>>> +
>>> +/ {
>>> + interrupt-parent = <&intc>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + clocks {
>>> + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <353000000>;
>>> + #clock-cells = <0>;
>>> + };
>>
>> What is the source for this clock? With it clocking at 353 MHz, I
>> doubt that it is an external clock.
> bias_pll_ubi_nc_clk (353MHz)is a backup source
> for Q6_AXIM2_CLK
Is this not handled internally by MPSS firmware or RPM
then?
Konrad
/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK
> It is from the CMN_PLL, and is the same as that of PPE core clock.
> Do you suggest to move its clock-frequency to Board DT similar to xo/sleep clock?
>>
>>> +
>>> + sleep_clk: sleep-clk {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + xo_board_clk: xo-board-clk {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> + };
>>
>> [skipped the rest]
>>
> Regards,
> Devi Priya
