On 27/03/2023 20:48, Dylan Van Assche wrote:
> Qualcomm SDM845 SoC features a SLPI DSP which uses FastRPC through
> an allocated memory region to load files from the host filesystem
> such as sensor configuration files.
>
> Add a FastRPC node at /dev/fastrpc-sdsp and a DMA region, similar to
> downstream, to allow userspace to communicate with the SLPI via the
> FastRPC interface for initializing the sensors on the SLPI.
>
> Signed-off-by: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 3b547cb7aeb8..7412ea938765 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -878,6 +878,14 @@ mdata_mem: mpss-metadata {
> size = <0 0x4000>;
> no-map;
> };
> +
> + fastrpc_mem: fastrpc {
> + compatible = "shared-dma-pool";
> + reusable;
> + alloc-ranges = <0 0x00000000 0 0xffffffff>;
> + alignment = <0 0x400000>;
> + size = <0 0x1000000>;
> + };
> };
>
> adsp_pas: remoteproc-adsp {
> @@ -3344,6 +3352,21 @@ glink-edge {
> label = "dsps";
> qcom,remote-pid = <3>;
> mboxes = <&apss_shared 24>;
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> + qcom,glink-channels = "fastrpcglink-apps-dsp";
> + label = "sdsp";
> + qcom,non-secure-domain;
> + qcom,vmids = <0x3 0xF 0x5 0x6>;
> + memory-region = <&fastrpc_mem>;
> + #address-cells = <1>;
> + #size-cells = <0>;
This does not make sense now with children nodes not having unit
addresses... but anyway, I do not understand why this one compute node
cannot have unit address.
Best regards,
Krzysztof
