Re: [PATCH 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 27.03.2023 12:14, Dmitry Baryshkov wrote:
> On 27/03/2023 11:05, Neil Armstrong wrote:
>> On 27/03/2023 09:59, Neil Armstrong wrote:
>>> On 24/03/2023 22:55, Dmitry Baryshkov wrote:
>>>> The first USB PHY on the sm8150 platform is really the USB+DP combo
>>>> PHY. Add the DP part of the PHY.
>>>>
>>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>>>> ---
>>>>   arch/arm64/boot/dts/qcom/sm8150.dtsi | 17 +++++++++++++----
>>>>   1 file changed, 13 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
>>>> index 9491be4a6bf0..a618218f7b68 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
>>>> @@ -3392,20 +3392,19 @@ usb_2_hsphy: phy@88e3000 {
>>>>           };
>>>>           usb_1_qmpphy: phy@88e9000 {
>>>> -            compatible = "qcom,sm8150-qmp-usb3-phy";
>>>> +            compatible = "qcom,sm8150-qmp-usb3-dp-phy";
>>>>               reg = <0 0x088e9000 0 0x18c>,
>>>> -                  <0 0x088e8000 0 0x10>;
>>>> +                  <0 0x088e8000 0 0x38>,
>>>> +                  <0 0x088ea000 0 0x40>;
>>>>               status = "disabled";
>>>>               #address-cells = <2>;
>>>>               #size-cells = <2>;
>>>>               ranges;
>>>> -
>>>>               clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
>>>>                    <&rpmhcc RPMH_CXO_CLK>,
>>>>                    <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
>>>>                    <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
>>>>               clock-names = "aux", "ref_clk_src", "ref", "com_aux";
>>>> -
>>>>               resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
>>>>                    <&gcc GCC_USB3_PHY_PRIM_BCR>;
>>>>               reset-names = "phy", "common";
>>>> @@ -3423,6 +3422,16 @@ usb_1_ssphy: phy@88e9200 {
>>>>                   clock-names = "pipe0";
>>>>                   clock-output-names = "usb3_phy_pipe_clk_src";
>>>>               };
>>>> +
>>>> +            usb_1_dpphy: phy@88ea200 {
>>>> +                reg = <0 0x088ea200 0 0x200>,
>>>> +                      <0 0x088ea400 0 0x200>,
>>>> +                      <0 0x088eaa00 0 0x200>,
>>>> +                      <0 0x088ea600 0 0x200>,
>>>> +                      <0 0x088ea800 0 0x200>;
>>>> +                #clock-cells = <1>;
>>>> +                #phy-cells = <0>;
>>>> +            };
>>>
>>> Is there a reason why the new flat bindings from qcom,sc8280xp-qmp-usb43dp-phy.yaml are not used instead ?
>>>
>>
>> Oh ok I see "phy: qcom-qmp-combo: convert to newer style of bindings" is the followup of this serie,
>> please specify it because it wasn't obvious...
> 
> I thought that a note in the cover letter was good enough, but yeah, maybe it should be more explicit. Do you think it warrants v2? I can send one.
IMO it's unnecessary so long as both get in.

Konrad
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux