Re: [PATCH V3 7/7] arm64: dts: imx8mp: add interconnect for hsio blk ctrl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

Am Montag, 27. März 2023, 06:50:37 CEST schrieb Greg Ungerer:
> On 2/3/22 17:13, Peng Fan wrote:
> > From: Peng Fan <peng.fan@xxxxxxx>
> > 
> > Add interconnect property for hsio blk ctrl
> > 
> > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > ---
> > 
>  > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 5 +++++
>  > 1 file changed, 5 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index
> > 08bd57742294..9cceeeeb26be 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1109,6 +1109,11 @@ hsio_blk_ctrl: blk-ctrl@32f10000 {
> > 
> >  						<&pgc_hsiomix>, 
<&pgc_pcie_phy>;
> >  				
> >  				power-domain-names = "bus", "usb", 
"usb-phy1",
> >  				
> >  						     "usb-phy2", 
"pcie", "pcie-phy";
> > 
> > +				interconnects = <&noc 
IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>,
> > +						<&noc 
IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>,
> > +						<&noc 
IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>,
> > +						<&noc 
IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>;
> > +				interconnect-names = "noc-pcie", 
"usb1", "usb2", "pcie";
> > 
> >  				#power-domain-cells = <1>;
> >  			
> >  			};
> >  		
> >  		};
> 
> This change completely breaks USB for me on a new iMX8mp platform I am
> working with. Before this change normal USB probe looks good:
> 
>     xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
>     xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
>     xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6d hci version 0x110 quirks
> 0x0000000000010010 xhci-hcd xhci-hcd.0.auto: irq 206, io mem 0x38100000
>     xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
>     xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
>     xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
>     usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
> bcdDevice= 6.03 usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1 usb usb1: Product: xHCI Host Controller
>     usb usb1: Manufacturer: Linux 6.3.0-rc4-dirty xhci-hcd
>     ....
> 
> But after this commit is applied, no USB probe messages at all.
> 
> USB worked fine in 6.0 for me, but when I switched up to 6.1 USB was broken,
> I bisected to this as being the offending commit. This is still broken for
> me in todays 6.3-rc4. If I revert this change (and only this change) USB
> works again.
> 
> Any thoughts on why this breaks USB?

Maybe you are missing CONFIG_INTERCONNECT_IMX8MP?

Best regards,
Alexander

-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux