Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 57 ++++++++++------------------
1 file changed, 19 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3c799b564b64..98004b02b762 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc7180.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -2713,49 +2714,28 @@ usb_1_hsphy: phy@88e3000 {
nvmem-cells = <&qusb2p_hstx_trim>;
};
- usb_1_qmpphy: phy-wrapper@88e9000 {
+ usb_1_qmpphy: phy@88e8000 {
compatible = "qcom,sc7180-qmp-usb3-dp-phy";
- reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x3c>,
- <0 0x088ea000 0 0x18c>;
+ reg = <0 0x088e8000 0 0x3000>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe",
+ "cfg_ahb";
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: usb3-phy@88e9200 {
- reg = <0 0x088e9200 0 0x128>,
- <0 0x088e9400 0 0x200>,
- <0 0x088e9c00 0 0x218>,
- <0 0x088e9600 0 0x128>,
- <0 0x088e9800 0 0x200>,
- <0 0x088e9a00 0 0x18>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_phy_pipe_clk_src";
- };
-
- dp_phy: dp-phy@88ea200 {
- reg = <0 0x088ea200 0 0x200>,
- <0 0x088ea400 0 0x200>,
- <0 0x088eaa00 0 0x200>,
- <0 0x088ea600 0 0x200>,
- <0 0x088ea800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
+ #clock-cells = <1>;
+ #phy-cells = <1>;
};
dc_noc: interconnect@9160000 {
@@ -2835,7 +2815,7 @@ usb_1_dwc3: usb@a600000 {
iommus = <&apps_smmu 0x540 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
maximum-speed = "super-speed";
};
@@ -3143,8 +3123,9 @@ mdss_dp: displayport-controller@ae90000 {
"ctrl_link_iface", "stream_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
- assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
- phys = <&dp_phy>;
+ assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+ phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
operating-points-v2 = <&dp_opp_table>;
@@ -3201,8 +3182,8 @@ dispcc: clock-controller@af00000 {
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&dsi_phy 0>,
<&dsi_phy 1>,
- <&dp_phy 0>,
- <&dp_phy 1>;
+ <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
clock-names = "bi_tcxo",
"gcc_disp_gpll0_clk_src",
"dsi0_phy_pll_out_byteclk",
--
2.30.2
