On 24.03.2023 21:22, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> so move the DSI OPP into the DSI controller node to fix:
>
> sda660-inforce-ifc6560.dtb: soc: opp-table-dsi: {'compatible': ['operating-points-v2'], ... should not be valid under {'type': 'object'}
> From schema: dtschema/schemas/simple-bus.yaml
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Nit: you also changed its node name and didn't mention that, but I
don't see that as anything major so it's gtg as-is
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sdm630.dtsi | 38 ++++++++++++++--------------
> 1 file changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index 5add1951d963..ef63aa86ad67 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -1450,25 +1450,6 @@ mmcc: clock-controller@c8c0000 {
> <0>;
> };
>
> - dsi_opp_table: opp-table-dsi {
> - compatible = "operating-points-v2";
> -
> - opp-131250000 {
> - opp-hz = /bits/ 64 <131250000>;
> - required-opps = <&rpmpd_opp_svs>;
> - };
> -
> - opp-210000000 {
> - opp-hz = /bits/ 64 <210000000>;
> - required-opps = <&rpmpd_opp_svs_plus>;
> - };
> -
> - opp-262500000 {
> - opp-hz = /bits/ 64 <262500000>;
> - required-opps = <&rpmpd_opp_nom>;
> - };
> - };
> -
> mdss: display-subsystem@c900000 {
> compatible = "qcom,mdss";
> reg = <0x0c900000 0x1000>,
> @@ -1610,6 +1591,25 @@ dsi0: dsi@c994000 {
>
> status = "disabled";
>
> + dsi_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-131250000 {
> + opp-hz = /bits/ 64 <131250000>;
> + required-opps = <&rpmpd_opp_svs>;
> + };
> +
> + opp-210000000 {
> + opp-hz = /bits/ 64 <210000000>;
> + required-opps = <&rpmpd_opp_svs_plus>;
> + };
> +
> + opp-262500000 {
> + opp-hz = /bits/ 64 <262500000>;
> + required-opps = <&rpmpd_opp_nom>;
> + };
> + };
> +
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
