Dne nedelja, 19. marec 2023 ob 22:29:30 CET je Andre Przywara napisal(a): > Hi, > > This patchset introduces support for F1C100s' USB, and the SourceParts > PopStick and Lctech Pi boards. > > These are the remaining (DT) patches, all driver and devicetree binding > patches for USB related devices, which were part of former versions of > this series, have now been merged (into v6.3-rc1). > What's left are just the DT bits: for the SoC .dtsi and LicheePi Nano > board .dts files. On top go patches that add support for two new boards. > > There were no actual changes to the patches, they are merely resend, > with the vendor and DT board name binding patches combined for the two > boards. All prerequisites are in the tree, so the tooling checks pass. > > Cheers, > Andre > > Changelog v5 ... v6: > - Drop all driver and USB DT binding patches (already merged separately) > - based on v6.3-rc2 > > Changelog v4 ... v5: > - Rebase on top to v6.2-rc1 > > Changelog v3 ... v4: > - Dropped the PHY patches, they go via a different tree and need a > different base > - rebased on top of linux-sunxi/sunxi/for-next (provides H616 USB) > - musb DT binding: use enum > - musb cleanup: use musb_hdrc_config config pointer directly > - musb cleanup: use const where possible > - drop partitions from Popstick DTS file > - clarify Popstick has a USB type-A *plug* > - add tags > > Changelog v2 ... v3: > - remove redundant "Device Tree Bindings" suffix in DT binding doc title > - add BSD license to binding doc file (as per checkpatch) > - fix some commit message title prefixes > - use proper plural spelling for usb0_id_det-gpios > - popstick.dts: Reorder otg_sram node reference alphabetically > - popstick.dts: Add regulator- prefix to 3.3V regulator node name > - popstick.dts: Fix status, compatible and reg property order > - popstick.dts: Drop unneeded mmc0 and spi0 aliases > - add patch to clean up sunxi MUSB driver > - add Acks and Reviewed-by's > > Changelog v1 ... v2: > - USB PHY binding: clarify the relation with other phy-sun4i-usb bindings > - Add Popstick binding and .dts patches > > > Andre Przywara (1): > ARM: dts: suniv: Add Lctech Pi F1C200s devicetree > > Icenowy Zheng (5): > ARM: dts: suniv: add USB-related device nodes > ARM: dts: suniv: licheepi-nano: enable USB > dt-bindings: vendor-prefixes: add Source Parts and Lctech names > dt-binding: arm: sunxi: add two board compatible strings > ARM: dts: suniv: add device tree for PopStick v1.1 > > .../devicetree/bindings/arm/sunxi.yaml | 13 +++ > .../devicetree/bindings/vendor-prefixes.yaml | 4 + > arch/arm/boot/dts/Makefile | 4 +- > .../boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 ++++ > arch/arm/boot/dts/suniv-f1c100s.dtsi | 32 ++++++++ > arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts | 76 +++++++++++++++++ > .../boot/dts/suniv-f1c200s-popstick-v1.1.dts | 81 +++++++++++++++++++ > 7 files changed, 225 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts > create mode 100644 arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts Applied, thanks! Best regards, Jernej
