In some setups XSHUTDOWN is connected to DOVDD when it's unused,
therefore treat the reset gpio as optional.
Reviewed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
drivers/media/i2c/ov2685.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov2685.c b/drivers/media/i2c/ov2685.c
index fdf3e06133302..f119a93e7c647 100644
--- a/drivers/media/i2c/ov2685.c
+++ b/drivers/media/i2c/ov2685.c
@@ -807,7 +807,7 @@ static int ov2685_probe(struct i2c_client *client)
if (clk_get_rate(ov2685->xvclk) != OV2685_XVCLK_FREQ)
dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
- ov2685->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ ov2685->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ov2685->reset_gpio)) {
dev_err(dev, "Failed to get reset-gpios\n");
return -EINVAL;
--
2.40.0
