The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index e54cdc8bc31f..4c9de236676d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -764,7 +764,7 @@ &swr0 {
left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
- powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrLeft";
#sound-dai-cells = <0>;
@@ -773,7 +773,7 @@ left_spkr: speaker@0,3 {
right_spkr: speaker@0,4 {
compatible = "sdw10217211000";
reg = <0 4>;
- powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrRight";
#sound-dai-cells = <0>;
--
2.34.1
