The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx> --- .../bindings/mfd/lantiq,pef2256.yaml | 205 ++++++++++++++++++ 1 file changed, 205 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml diff --git a/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml new file mode 100644 index 000000000000..affbf20df0a2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/lantiq,pef2256.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq PEF2256 + +maintainers: + - Herve Codina <herve.codina@xxxxxxxxxxx> + +description: + The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and + line interface component designed to fulfill all required interfacing between + an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. + +properties: + compatible: + items: + - const: lantiq,pef2256 + - const: simple-mfd + + reg: + maxItems: 1 + + clocks: + items: + - description: Master clock + - description: Receive System Clock + - description: Transmit System Clock + + clock-names: + items: + - const: mclk + - const: sclkr + - const: sclkx + + interrupts: + maxItems: 1 + + reset-gpios: + description: + GPIO used to reset the device. + maxItems: 1 + + pinctrl: + $ref: /schemas/pinctrl/pinctrl.yaml# + + patternProperties: + '-pins$': + type: object + $ref: /schemas/pinctrl/pincfg-node.yaml# + + properties: + pins: + enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ] + + function: + enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS, + SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT, + GPI, GPOH, GPOL ] + + additionalProperties: false + + required: + - pins + - function + + additionalProperties: false + + lantiq,line-interface: + $ref: /schemas/types.yaml#/definitions/string + enum: [e1, t1j1] + default: e1 + description: | + The line interface type + - e1: E1 line + - t1j1: T1/J1 line + + lantiq,frame-format: + $ref: /schemas/types.yaml#/definitions/string + description: + The line interface frame format. + + lantiq,data-rate-bps: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2048000, 4096000, 8192000, 16384000] + default: 2048000 + description: + Data rate (bit per seconds) on the system highway. + + lantiq,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Data is sent on falling edge of the clock (and received on the rising + edge). If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + lantiq,channel-phase: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: + The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit + time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data + rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000 + bit/s, the data (all 32 8bit) present in the frame are interleave with + unused time-slots. The lantiq,channel-phase property allows to set the + correct alignment of the interleave mechanism. + For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and + lantiq,channel-phase = 2, the interleave schema with unused time-slots + (nu) and used time-slots (XX) for TSi is + nu nu XX nu nu nu XX nu nu nu XX nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the + interleave schema is + nu XX nu nu nu XX nu nu nu XX nu nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and + lantiq,channel-phase = 1, the interleave schema is + nu XX nu XX nu XX + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + + lantiq,subordinate: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present, the pef2256 works in subordinate mode. In this mode it + synchronizes on line interface clock signals. Otherwise, it synchronizes + on internal clocks. + +patternProperties: + '^codec([0-9]|[1-2][0-9]|3[0-1])?$': + $ref: /schemas/sound/lantiq,pef2256-codec.yaml + +allOf: + - if: + properties: + lantiq,line-interface: + contains: + const: e1 + then: + properties: + lantiq,frame-format: + enum: [doubleframe, crc4-multiframe, auto-multiframe] + default: doubleframe + description: | + The E1 line interface frame format + - doubleframe: Doubleframe format + - crc4-multiframe: CRC4 multiframe format + - auto-multiframe: CRC4 multiframe format with interworking + capabilities (ITU-T G.706 Annex B) + + else: + # T1/J1 line + properties: + lantiq,frame-format: + enum: [4frame, 12frame, 24frame, 72frame] + default: 12frame + description: | + The T1/J1 line interface frame format + - 4frame: 4-frame multiframe format (F4) + - 12frame: 12-frame multiframe format (F12, D3/4) + - 24frame: 24-frame multiframe format (ESF) + - 72frame: 72-frame multiframe format (F72, remote switch mode) + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + framer@2000000 { + compatible = "lantiq,pef2256", "simple-mfd"; + reg = <0x2000000 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&intc>; + clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>; + clock-names = "mclk", "sclkr", "sclkx"; + reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + lantiq,data-rate-bps = <4096000>; + + pinctrl { + pef2256_rpa_sypr: rpa-pins { + pins = "RPA"; + function = "SYPR"; + }; + pef2256_xpa_sypx: xpa-pins { + pins = "XPA"; + function = "SYPX"; + }; + }; + + codec { + compatible = "lantiq,pef2256-codec"; + #sound-dai-cells = <0>; + }; + }; -- 2.39.2
