This series marks four of the regulators which have consumers not yet (fully) described in the devicetree as always-on to avoid the supply going away while the device is still in use. The last two patches adds the missing description of the pmic regulator and hid supplies, which is needed to eventually be able to disable the regulators in question. At least the first four patches should go into 6.3-rc, but it may simplify things to take also the pmic supply patch as a fix. Note that the pmic patch is adding the missing s1c supply, which is also needed by the pending bluetooth series. Johan Johan Hovold (6): arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on arm64: dts: qcom: sc8280xp-x13s: add pmic regulator supplies arm64: dts: qcom: sc8280xp-x13s: add hid 1.8V supplies .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) -- 2.39.2
