From: Peng Fan <peng.fan@xxxxxxx> This is target for i.MX8M* System-Ready IR 2.0 Cert. V7: Add R-b from Rob for patch 1 Address comments from Rob for patch 2: drop '|' for description; add type for extcon, non-zero-ttctrl-ttha; clean up if/else V6: Add R-b from Krzysztof for patch 1 V4 Add back patch 3 which got A-b from Rob in V3 V5: Fix dt warning Add more properties that existed in dts and driver to address dtbs check error Update NXP device tree to follow compatible rule A few dtbs fix to NXP dtbs V4: Merged V3 patch 1,2,3 into one patch Merged V3 patch 4,5,6 into one patch Added patch 3,4,5,6 for dts update Addressed Rob's comments to v3 patch 1, patch 4 for compatible, deprecated property V3: Sorry for this long time delay for V3. I thought this should be V5, but actually I only posted two versions before. Add myself ad maintainer The major changes are in patch 4: Added some properties to address dtbs_check error, for qcom, fsl. But I still leave some properties not introduced, such as phy-select for qcom, nvidia,needs-double-reset operating-points-v2 for nvidia, which I would expect sub-soc maintainers continue on it. Add A-b from Rob Add a new patch 7 v2: patch order changed, usbmisc-imx moved to first Add Xu Yang as maintainer Typo fix Not define properties within if/then/else Set additionalProperties to false Drop duplicated compatibles Fix checkpatch issue For pinctrl-names: I think there is restrictin in allOf, so not list items Add fsl,usbmisc: ref Define items for mux-control-names Rename usbmisc-imx.yaml to fsl,usbmisc.yaml Hope I not miss any comments Note: there will still be dtbs_check failure if run with only a single patch, with this patchset applied, there is no related dtbs_check failure. This patchset is to convert ci-hdrc-usb2 and usbmisc-imx to yaml format. There are compatible strings not landed in binding doc, but in device tree, so run dtbs_check on the single yaml conversion patch will report dtbs_check failure. If apply the whole patchset, there will be no failure. Peng Fan (10): dt-bindings: usb: usbmisc-imx: convert to DT schema dt-bindings: usb: ci-hdrc-usb2: convert to DT schema format dt-bindings: usb: usb-nop-xceiv: add power-domains property arm64: dts: imx8mn: update usb compatible arm64: dts: imx8mm: update usb compatible arm64: dts: imx8: update usb compatible arm64: dts: imx8dxl: update usb compatible arm64: dts: imx8dxl: drop #stream-id-cells for usb node arm64: dts: imx8-apalis-v1.1: drop ci-disable-lpm ARM64: dts: imx7ulp: update usb compatible .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 159 ------- .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 447 ++++++++++++++++++ .../devicetree/bindings/usb/fsl,usbmisc.yaml | 68 +++ .../bindings/usb/usb-nop-xceiv.yaml | 3 + .../devicetree/bindings/usb/usbmisc-imx.txt | 19 - arch/arm/boot/dts/imx7ulp.dtsi | 5 +- .../boot/dts/freescale/imx8-apalis-v1.1.dtsi | 1 - .../boot/dts/freescale/imx8-ss-conn.dtsi | 4 +- .../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 5 +- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 10 +- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 5 +- 11 files changed, 534 insertions(+), 192 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml create mode 100644 Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml delete mode 100644 Documentation/devicetree/bindings/usb/usbmisc-imx.txt -- 2.37.1
