RE: [PATCH v11 03/13] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Serge,

> From: Serge Semin, Sent: Tuesday, March 21, 2023 8:36 PM
> 
> On Fri, Mar 10, 2023 at 09:35:00PM +0900, Yoshihiro Shimoda wrote:
> > Document bindings for Renesas R-Car Gen4 and R-Car S4-8 (R8A779F0)
> > PCIe host module.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> 
> Looks good.
> Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>

Thank you for your review!

> > ---
> >  .../bindings/pci/rcar-gen4-pci-host.yaml      | 108 ++++++++++++++++++
> >  1 file changed, 108 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
> b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
> > new file mode 100644
> > index 000000000000..d838d7c50410
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
> > @@ -0,0 +1,108 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id:
<snip>
> > +$schema:
<snip>
> > +
> > +title: Renesas R-Car Gen4 PCIe Host
> > +
> > +maintainers:
> > +  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > +
> > +allOf:
> > +  - $ref: snps,dw-pcie.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: renesas,r8a779f0-pcie   # R-Car S4-8
> > +      - const: renesas,rcar-gen4-pcie  # R-Car Gen4
> > +
> > +  reg:
> > +    maxItems: 5
> > +
> > +  reg-names:
> > +    items:
> > +      - const: dbi
> > +      - const: atu
> > +      - const: dma
> > +      - const: app
> > +      - const: config
> > +
> > +  interrupts:
> > +    maxItems: 4
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: msi
> > +      - const: dma
> > +      - const: sft_ce
> 
> > +      - const: app
> 
> Just curious what is this IRQ used for?

The pcie-rcar-gen4 drivers (host and endpoint) doesn't use this IRQ,
But the hardware issues the IRQ when it receives a vendor defined message
from remote device.

Best regards,
Yoshihiro Shimoda

> -Serge(y)
> 
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  max-link-speed:
> > +    maximum: 4
> > +
> > +  num-lanes:
> > +    maximum: 4
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - power-domains
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/power/r8a779f0-sysc.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        pcie: pcie@e65d0000 {
> > +            compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie";
> > +            reg = <0 0xe65d0000 0 0x3000>, <0 0xe65d3000 0 0x2000>,
> > +                  <0 0xe65d5000 0 0x1200>, <0 0xe65d6200 0 0x0e00>,
> > +                  <0 0xfe000000 0 0x400000>;
> > +            reg-names = "dbi", "atu", "dma", "app", "config";
> > +            #address-cells = <3>;
> > +            #size-cells = <2>;
> > +            bus-range = <0x00 0xff>;
> > +            device_type = "pci";
> > +            ranges = <0x81000000 0 0x00000000 0 0xfe000000 0 0x00400000
> > +                      0x82000000 0 0x30000000 0 0x30000000 0 0x10000000>;
> > +            dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
> > +            interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> > +            interrupt-names = "msi", "dma", "sft_ce", "app";
> > +            #interrupt-cells = <1>;
> > +            interrupt-map-mask = <0 0 0 7>;
> > +            interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
> > +                             0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
> > +                             0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
> > +                             0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
> > +            clocks = <&cpg CPG_MOD 624>;
> > +            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
> > +            resets = <&cpg 624>;
> > +            num-lanes = <2>;
> > +            snps,enable-cdm-check;
> > +            max-link-speed = <2>;
> > +        };
> > +    };
> > --
> > 2.25.1
> >
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux