Re: [PATCH v11 01/13] PCI: dwc: Fix writing wrong value if snps,enable-cdm-check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 21, 2023 at 01:52:28PM -0500, Bjorn Helgaas wrote:
> On Tue, Mar 21, 2023 at 12:02:55PM +0300, Serge Semin wrote:
> > On Fri, Mar 10, 2023 at 09:34:58PM +0900, Yoshihiro Shimoda wrote:
> > > The "val" of PCIE_PORT_LINK_CONTROL will be reused on the
> > > "Set the number of lanes". But, if snps,enable-cdm-check" exists,
> > > the "val" will be set to PCIE_PL_CHK_REG_CONTROL_STATUS.
> > > Therefore, unexpected register value is possible to be used
> > > to PCIE_PORT_LINK_CONTROL register if snps,enable-cdm-check" exists.
> > > So, change reading timing of PCIE_PORT_LINK_CONTROL register to fix
> > > the issue.
> > 
> > My version of the commit log:
> > < If CDM_CHECK capability is set then the local variable 'val' will be
> > < overwritten in the dw_pcie_setup() method in the PL_CHK register
> > < initialization procedure. Thus further variable usage in the framework of
> > < the PCIE_PORT_LINK_CONTROL register initialization at the very least must
> > < imply the variable re-initialization. Alas it hasn't been taken into
> > < account in the commit ec7b952f453c ("PCI: dwc: Always enable CDM check if
> > < "snps,enable-cdm-check" exists"). Due to that the PCIE_PORT_LINK_CONTROL
> > < register will be written with an improper value in case if the CDM-check
> > < is enabled. Let's fix this by moving the PCIE_PORT_LINK_CONTROL CSR
> > < updated to be fully performed after the PL_CHK register
> > < initialization.
> > 
> > > 
> > > Fixes: ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists")
> > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > 
> > Looks good. Thanks.
> > Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
> > 
> > @Bjorn, if it's possible could you please take this patch to a
> > fixes(-ish) branch of your tree and merge it in the next rc-cycle?
> > It definitely fixes a bug in the DW PCIe core driver.
> 

> I applied this patch only to for-linus for v6.3.  I adapted the commit
> message as follows, let me know if you spot a mistake:
> 
>   PCI: dwc: Fix PORT_LINK_CONTROL update when CDM check enabled
>   
>   If CDM_CHECK is enabled (by the DT "snps,enable-cdm-check" property), 'val'
>   is overwritten by PCIE_PL_CHK_REG_CONTROL_STATUS initialization.  Commit
>   ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check"
>   exists") did not account for further usage of 'val', so we wrote improper
>   values to PCIE_PORT_LINK_CONTROL when the CDM check is enabled.
>   
>   Move the PCIE_PORT_LINK_CONTROL update to be completely after the
>   PCIE_PL_CHK_REG_CONTROL_STATUS register initialization.
>   
>   [bhelgaas: commit log adapted from Serge's version]

Sounds good. Thanks!

* I'll keep reviewing the rest of the patches in the series. There are
several aspects which I think is possible to improve/optimize.

-Serge(y)

> 
> > > ---
> > >  drivers/pci/controller/dwc/pcie-designware.c | 10 +++++-----
> > >  1 file changed, 5 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > > index 53a16b8b6ac2..8e33e6e59e68 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > @@ -1001,11 +1001,6 @@ void dw_pcie_setup(struct dw_pcie *pci)
> > >  		dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
> > >  	}
> > >  
> > > -	val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
> > > -	val &= ~PORT_LINK_FAST_LINK_MODE;
> > > -	val |= PORT_LINK_DLL_LINK_EN;
> > > -	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
> > > -
> > >  	if (dw_pcie_cap_is(pci, CDM_CHECK)) {
> > >  		val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS);
> > >  		val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS |
> > > @@ -1013,6 +1008,11 @@ void dw_pcie_setup(struct dw_pcie *pci)
> > >  		dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
> > >  	}
> > >  
> > > +	val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
> > > +	val &= ~PORT_LINK_FAST_LINK_MODE;
> > > +	val |= PORT_LINK_DLL_LINK_EN;
> > > +	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
> > > +
> > >  	if (!pci->num_lanes) {
> > >  		dev_dbg(pci->dev, "Using h/w default number of lanes\n");
> > >  		return;
> > > -- 
> > > 2.25.1
> > > 
> > > 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux