On 21.03.2023 10:00, Sergio Paracuellos wrote:
On Tue, Mar 21, 2023 at 7:45 AM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
On 21/03/2023 06:00, Sergio Paracuellos wrote:
Adds device tree binding documentation for system controller node present
in Mediatek MIPS and Ralink SOCs. This node is a clock and reset provider
for the rest of the world. This covers RT2880, RT3050, RT3052, RT3350,
RT3883, RT5350, MT7620, MT7628 and MT7688 SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
.../bindings/clock/mediatek,mtmips-sysc.yaml | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
new file mode 100644
index 000000000000..f07e1652723b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTMIPS SoCs System Controller
+
+maintainers:
+ - Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
+
+description: |
+ MediaTek MIPS and Ralink SoCs provides a system controller to allow
+ to access to system control registers. These registers include clock
+ and reset related ones so this node is both clock and reset provider
+ for the rest of the world.
+
+ These SoCs have an XTAL from where the cpu clock is
+ provided as well as derived clocks for the bus and the peripherals.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - ralink,mt7620-sysc
Since you decided to send it before we finish discussion:
NAK - this is already used as mediatek
Sorry, there was too much stuff commented so I preferred to clean up
all of them while maintaining the compatibles with the ralink prefix
instead since that was where the current discussion was at that point.
+ - ralink,mt7620a-sysc
As I have said, this one exists:
arch/mips/ralink/mt7620.c: rt_sysc_membase =
plat_of_remap_node("ralink,mt7620a-sysc");
+ - ralink,mt7628-sysc
Same here.
+ - ralink,mt7688-sysc
I expect you to check the others.
I can change others to mediatek but that would be a bit weird, don't you think?
I've seen some parts of the MTMIPS platform use mediatek compatible
strings thanks to Krzysztof pointing them out. I don't like having some
parts of the MTMIPS platform (pci, mmc, usbphy, etc.) with mediatek
compatible string while others are ralink.
Like Krzysztof said [0], Ralink is now Mediatek, thus there is no
conflict and no issues with different vendor used. So I'd rather keep
new things Ralink and gradually change these mediatek strings to ralink.
[0] https://patchwork.kernel.org/comment/25232828/
Arınç
