Add the new programming sequence needed for EMAC3 based platforms such
as the sc8280xp family.
Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
---
Changes since v1:
* None
.../stmicro/stmmac/dwmac-qcom-ethqos.c | 106 ++++++++++++++----
1 file changed, 84 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 41e6f4fa92f3..1fe8563b9c0d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -11,6 +11,7 @@
#define RGMII_IO_MACRO_CONFIG 0x0
#define SDCC_HC_REG_DLL_CONFIG 0x4
+#define SDCC_TEST_CTL 0x8
#define SDCC_HC_REG_DDR_CONFIG 0xC
#define SDCC_HC_REG_DLL_CONFIG2 0x10
#define SDC4_STATUS 0x14
@@ -49,6 +50,7 @@
#define SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY GENMASK(26, 21)
#define SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE GENMASK(29, 27)
#define SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN BIT(30)
+#define SDCC_DDR_CONFIG_TCXO_CYCLES_CNT GENMASK(11, 9)
#define SDCC_DDR_CONFIG_PRG_RCLK_DLY GENMASK(8, 0)
/* SDCC_HC_REG_DLL_CONFIG2 fields */
@@ -79,6 +81,7 @@ struct ethqos_emac_driver_data {
const struct ethqos_emac_por *por;
unsigned int num_por;
bool rgmii_config_loopback_en;
+ bool has_emac3;
};
struct qcom_ethqos {
@@ -92,6 +95,7 @@ struct qcom_ethqos {
const struct ethqos_emac_por *por;
unsigned int num_por;
bool rgmii_config_loopback_en;
+ bool has_emac3;
};
static int rgmii_readl(struct qcom_ethqos *ethqos, unsigned int offset)
@@ -184,6 +188,7 @@ static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
.por = emac_v2_3_0_por,
.num_por = ARRAY_SIZE(emac_v2_3_0_por),
.rgmii_config_loopback_en = true,
+ .has_emac3 = false,
};
static const struct ethqos_emac_por emac_v2_1_0_por[] = {
@@ -199,6 +204,23 @@ static const struct ethqos_emac_driver_data emac_v2_1_0_data = {
.por = emac_v2_1_0_por,
.num_por = ARRAY_SIZE(emac_v2_1_0_por),
.rgmii_config_loopback_en = false,
+ .has_emac3 = false,
+};
+
+static const struct ethqos_emac_por emac_v3_0_0_por[] = {
+ { .offset = RGMII_IO_MACRO_CONFIG, .value = 0x40c01343 },
+ { .offset = SDCC_HC_REG_DLL_CONFIG, .value = 0x2004642c },
+ { .offset = SDCC_HC_REG_DDR_CONFIG, .value = 0x80040800 },
+ { .offset = SDCC_HC_REG_DLL_CONFIG2, .value = 0x00200000 },
+ { .offset = SDCC_USR_CTL, .value = 0x00010800 },
+ { .offset = RGMII_IO_MACRO_CONFIG2, .value = 0x00002060 },
+};
+
+static const struct ethqos_emac_driver_data emac_v3_0_0_data = {
+ .por = emac_v3_0_0_por,
+ .num_por = ARRAY_SIZE(emac_v3_0_0_por),
+ .rgmii_config_loopback_en = false,
+ .has_emac3 = true,
};
static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
@@ -222,11 +244,13 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
rgmii_updatel(ethqos, SDCC_DLL_CONFIG_DLL_EN,
SDCC_DLL_CONFIG_DLL_EN, SDCC_HC_REG_DLL_CONFIG);
- rgmii_updatel(ethqos, SDCC_DLL_MCLK_GATING_EN,
- 0, SDCC_HC_REG_DLL_CONFIG);
+ if (!ethqos->has_emac3) {
+ rgmii_updatel(ethqos, SDCC_DLL_MCLK_GATING_EN,
+ 0, SDCC_HC_REG_DLL_CONFIG);
- rgmii_updatel(ethqos, SDCC_DLL_CDR_FINE_PHASE,
- 0, SDCC_HC_REG_DLL_CONFIG);
+ rgmii_updatel(ethqos, SDCC_DLL_CDR_FINE_PHASE,
+ 0, SDCC_HC_REG_DLL_CONFIG);
+ }
/* Wait for CK_OUT_EN clear */
do {
@@ -261,18 +285,20 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_CAL_EN,
SDCC_DLL_CONFIG2_DDR_CAL_EN, SDCC_HC_REG_DLL_CONFIG2);
- rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DLL_CLOCK_DIS,
- 0, SDCC_HC_REG_DLL_CONFIG2);
+ if (!ethqos->has_emac3) {
+ rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DLL_CLOCK_DIS,
+ 0, SDCC_HC_REG_DLL_CONFIG2);
- rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_MCLK_FREQ_CALC,
- 0x1A << 10, SDCC_HC_REG_DLL_CONFIG2);
+ rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_MCLK_FREQ_CALC,
+ 0x1A << 10, SDCC_HC_REG_DLL_CONFIG2);
- rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SEL,
- BIT(2), SDCC_HC_REG_DLL_CONFIG2);
+ rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SEL,
+ BIT(2), SDCC_HC_REG_DLL_CONFIG2);
- rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
- SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
- SDCC_HC_REG_DLL_CONFIG2);
+ rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
+ SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
+ SDCC_HC_REG_DLL_CONFIG2);
+ }
return 0;
}
@@ -326,9 +352,17 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
RGMII_CONFIG2_RX_PROG_SWAP,
RGMII_IO_MACRO_CONFIG2);
- /* Set PRG_RCLK_DLY to 57 for 1.8 ns delay */
- rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
- 57, SDCC_HC_REG_DDR_CONFIG);
+ /* PRG_RCLK_DLY = TCXO period * TCXO_CYCLES_CNT / 2 * RX delay ns,
+ * in practice this becomes PRG_RCLK_DLY = 52 * 4 / 2 * RX delay ns
+ */
+ if (ethqos->has_emac3)
+ /* 0.9 ns */
+ rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+ 115, SDCC_HC_REG_DDR_CONFIG);
+ else
+ /* 1.8 ns */
+ rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+ 57, SDCC_HC_REG_DDR_CONFIG);
rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_DLY_EN,
SDCC_DDR_CONFIG_PRG_DLY_EN,
SDCC_HC_REG_DDR_CONFIG);
@@ -354,8 +388,15 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
BIT(6), RGMII_IO_MACRO_CONFIG);
rgmii_updatel(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
0, RGMII_IO_MACRO_CONFIG2);
- rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
- 0, RGMII_IO_MACRO_CONFIG2);
+
+ if (ethqos->has_emac3)
+ rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+ RGMII_CONFIG2_RX_PROG_SWAP,
+ RGMII_IO_MACRO_CONFIG2);
+ else
+ rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+ 0, RGMII_IO_MACRO_CONFIG2);
+
/* Write 0x5 to PRG_RCLK_DLY_CODE */
rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
(BIT(29) | BIT(27)), SDCC_HC_REG_DDR_CONFIG);
@@ -388,8 +429,13 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
RGMII_IO_MACRO_CONFIG);
rgmii_updatel(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
0, RGMII_IO_MACRO_CONFIG2);
- rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
- 0, RGMII_IO_MACRO_CONFIG2);
+ if (ethqos->has_emac3)
+ rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+ RGMII_CONFIG2_RX_PROG_SWAP,
+ RGMII_IO_MACRO_CONFIG2);
+ else
+ rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+ 0, RGMII_IO_MACRO_CONFIG2);
/* Write 0x5 to PRG_RCLK_DLY_CODE */
rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
(BIT(29) | BIT(27)), SDCC_HC_REG_DDR_CONFIG);
@@ -432,6 +478,17 @@ static int ethqos_configure(struct qcom_ethqos *ethqos)
rgmii_updatel(ethqos, SDCC_DLL_CONFIG_PDN,
SDCC_DLL_CONFIG_PDN, SDCC_HC_REG_DLL_CONFIG);
+ if (ethqos->has_emac3) {
+ if (ethqos->speed == SPEED_1000) {
+ rgmii_writel(ethqos, 0x1800000, SDCC_TEST_CTL);
+ rgmii_writel(ethqos, 0x2C010800, SDCC_USR_CTL);
+ rgmii_writel(ethqos, 0xA001, SDCC_HC_REG_DLL_CONFIG2);
+ } else {
+ rgmii_writel(ethqos, 0x40010800, SDCC_USR_CTL);
+ rgmii_writel(ethqos, 0xA001, SDCC_HC_REG_DLL_CONFIG2);
+ }
+ }
+
/* Clear DLL_RST */
rgmii_updatel(ethqos, SDCC_DLL_CONFIG_DLL_RST, 0,
SDCC_HC_REG_DLL_CONFIG);
@@ -451,7 +508,9 @@ static int ethqos_configure(struct qcom_ethqos *ethqos)
SDCC_HC_REG_DLL_CONFIG);
/* Set USR_CTL bit 26 with mask of 3 bits */
- rgmii_updatel(ethqos, GENMASK(26, 24), BIT(26), SDCC_USR_CTL);
+ if (!ethqos->has_emac3)
+ rgmii_updatel(ethqos, GENMASK(26, 24), BIT(26),
+ SDCC_USR_CTL);
/* wait for DLL LOCK */
do {
@@ -546,6 +605,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
ethqos->por = data->por;
ethqos->num_por = data->num_por;
ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
+ ethqos->has_emac3 = data->has_emac3;
ethqos->rgmii_clk = devm_clk_get(&pdev->dev, "rgmii");
if (IS_ERR(ethqos->rgmii_clk)) {
@@ -564,7 +624,8 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
plat_dat->bsp_priv = ethqos;
plat_dat->fix_mac_speed = ethqos_fix_mac_speed;
plat_dat->dump_debug_regs = rgmii_dump;
- plat_dat->has_gmac4 = 1;
+ plat_dat->has_gmac4 = !data->has_emac3;
+ plat_dat->has_emac3 = data->has_emac3;
plat_dat->pmt = 1;
plat_dat->tso_en = of_property_read_bool(np, "snps,tso");
if (of_device_is_compatible(np, "qcom,qcs404-ethqos"))
@@ -603,6 +664,7 @@ static int qcom_ethqos_remove(struct platform_device *pdev)
static const struct of_device_id qcom_ethqos_match[] = {
{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_data},
{ .compatible = "qcom,sm8150-ethqos", .data = &emac_v2_1_0_data},
+ { .compatible = "qcom,sc8280xp-ethqos", &emac_v3_0_0_data},
{ }
};
MODULE_DEVICE_TABLE(of, qcom_ethqos_match);
--
2.39.2
