Hi, this is a driver for the infrared receiver available in Amlogic Meson6 and Meson8 SoCs. The device can operate in two modes: "NEC" mode in which the hardware decodes frames using the NEC IR protocol, and "general" mode in which the receiver simply reports the duration of pulses and spaces for software decoding. In order to have the maximum compatibility with different protocols the driver implements software decoding. Changes since v2 [ https://lkml.org/lkml/2014/10/12/149 ]: - avoid calling rc_free_device() twice in probe error path Changes since v1 [ https://lkml.org/lkml/2014/11/9/20 ]: - added COMPILE_TEST to allow compilation for other architectures - added missing header files - removed bogus vendor, product and version assignments - added file path to Meson entry in MAINTAINERS - reordered patches Beniamino Galvani (3): media: rc: meson: document device tree bindings media: rc: add driver for Amlogic Meson IR remote receiver ARM: dts: meson: add IR receiver node .../devicetree/bindings/media/meson-ir.txt | 14 ++ MAINTAINERS | 1 + arch/arm/boot/dts/meson.dtsi | 7 + drivers/media/rc/Kconfig | 11 ++ drivers/media/rc/Makefile | 1 + drivers/media/rc/meson-ir.c | 216 +++++++++++++++++++++ 6 files changed, 250 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/meson-ir.txt create mode 100644 drivers/media/rc/meson-ir.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
