Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec stm32m157c-som. Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/Makefile | 3 +- .../dts/stm32mp157c-phycore-stm32mp1-3.dts | 66 +++++++++++++++++++ 2 files changed, 68 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index efe4152e5846d..dfa9a7477c825 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1252,7 +1252,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-ev1.dtb \ stm32mp157c-ev1-scmi.dtb \ stm32mp157c-lxa-mc1.dtb \ - stm32mp157c-odyssey.dtb + stm32mp157c-odyssey.dtb \ + stm32mp157c-phycore-stm32mp1-3.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts new file mode 100644 index 0000000000000..6f4e5f326bdd3 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved + * Author: Dom VOVARD <dom.vovard@xxxxxxxxx>. + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/stm32-pinfunc.h> +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp157c-phycore-stm32mp15-som.dtsi" + +/ { + model = "PHYTEC phyCORE-STM32MP1-3 Dev Board"; + compatible = "phytec,phycore-stm32mp1-3", + "phytec,phycore-stm32mp157c-som", "st,stm32mp157"; + + aliases { + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + mmc2 = &sdmmc3; + serial0 = &uart4; + serial1 = &usart3; + serial2 = &usart1; + }; +}; + +&cryp1 { + status = "okay"; +}; + +&dts { + status = "okay"; +}; + +&fmc { + status = "disabled"; +}; + +&gpu { + status = "okay"; + contiguous-area = <&gpu_reserved>; +}; + +&i2c4_eeprom { + status = "okay"; +}; + +&i2c4_rtc { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&sdmmc1 { + secure-status = "disabled"; +}; + +&sdmmc2 { + status = "okay"; + secure-status = "disabled"; +}; -- 2.39.1