[PATCH v4 04/18] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add port as an optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



port is required to instantiate a remote-endpoint which can receive
orientation-switch messages from a Type-C mux.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 .../bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml           | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
index 52886cdb0e506..1c887e34b1223 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
@@ -65,6 +65,12 @@ properties:
     description: Flag the port as possible handler of orientation switching
     type: boolean
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the PHY to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
   resets:
     items:
       - description: reset of phy block.
-- 
2.39.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux