On 16/03/2023 22:15, Henrik Grimler wrote:
> Add aliases for eMMC, SD card and WiFi where applicable, so that
> assigned mmc indeces are always the same.
>
> Co-developed-by: Anton Bambura <jenneron@xxxxxxxxxxxxxx>
> Signed-off-by: Anton Bambura <jenneron@xxxxxxxxxxxxxx>
> [ Tested on exynos5800-peach-pi ]
> Tested-by: Valentine Iourine <iourine@xxxxxxxxxxxxxx>
> Signed-off-by: Henrik Grimler <henrik@xxxxxxxxxx>
> Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
>
> chosen {
> diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
> index bba85011ecc9..7051e2c4b391 100644
> --- a/arch/arm/boot/dts/exynos4210-i9100.dts
> +++ b/arch/arm/boot/dts/exynos4210-i9100.dts
> @@ -25,6 +25,12 @@ memory@40000000 {
> reg = <0x40000000 0x40000000>;
> };
>
> + aliases {
> + mmc0 = &sdhci_0;
> + mmc2 = &sdhci_2;
> + mmc3 = &sdhci_3;
Here...
> + };
> +
> chosen {
> stdout-path = "serial2:115200n8";
> };
> diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
> index 1103e7f92b57..1970c31410e5 100644
> --- a/arch/arm/boot/dts/exynos4210-origen.dts
> +++ b/arch/arm/boot/dts/exynos4210-origen.dts
> @@ -30,6 +30,11 @@ memory@40000000 {
> 0x70000000 0x10000000>;
> };
>
> + aliases {
> + mmc0 = &sdhci_0;
here ....
> + mmc2 = &sdhci_2;
> + };
> +
> chosen {
> bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
> stdout-path = "serial2:115200n8";
> diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
> index 181c99eca675..cb74af41e17c 100644
> --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
> +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
> @@ -25,6 +25,10 @@ memory@40000000 {
> reg = <0x40000000 0x80000000>;
> };
>
> + aliases {
> + mmc2 = &sdhci_2;
> + };
> +
> chosen {
> bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
> stdout-path = "serial1:115200n8";
> diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
> index b8e9dd23fc51..b6b0c116016c 100644
> --- a/arch/arm/boot/dts/exynos4210-trats.dts
> +++ b/arch/arm/boot/dts/exynos4210-trats.dts
> @@ -26,6 +26,12 @@ memory@40000000 {
> 0x70000000 0x10000000>;
> };
>
> + aliases {
> + mmc0 = &sdhci_0;
> + mmc2 = &sdhci_2;
> + mmc3 = &sdhci_3;
> + };
> +
> chosen {
> bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
> stdout-path = "serial2:115200n8";
> diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> index 140abfb38e1d..f42cfcbcdcfa 100644
> --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
> +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> @@ -24,6 +24,12 @@ memory@40000000 {
> 0x50000000 0x10000000>;
> };
>
> + aliases {
> + mmc0 = &sdhci_0;
> + mmc2 = &sdhci_2;
Why this is 2? Aliases are continues and match the board. For example
Universal calls this mmc1 and the next mmc2, not 3.
I bet it is the same on Trats and all other boards.
> + mmc3 = &sdhci_3;
> + };
> +
> chosen {
> bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
> stdout-path = "serial2:115200n8";
> diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> index 6260da187e92..0e5419c0eaff 100644
> --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
> +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> @@ -20,6 +20,10 @@ / {
> model = "TOPEET iTop 4412 Elite board based on Exynos4412";
> compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
>
> + aliases {
> + mmc2 = &sdhci_2;
mmc1
> + };
> +
> chosen {
> bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait";
> stdout-path = "serial2:115200n8";
> diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
> index ca8d42b2ce3b..7bc6968af9c3 100644
> --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
> @@ -23,6 +23,10 @@ memory@40000000 {
> reg = <0x40000000 0x40000000>;
> };
>
> + aliases {
> + mmc0 = &mshc_0;
> + };
> +
> firmware@203f000 {
> compatible = "samsung,secure-firmware";
> reg = <0x0203f000 0x1000>;
> diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
> index 82aed59cba7c..e6b949c1a00f 100644
> --- a/arch/arm/boot/dts/exynos4412-midas.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
> @@ -25,6 +25,9 @@ / {
> aliases {
> i2c11 = &i2c_max77693;
> i2c12 = &i2c_max77693_fuel;
> + mmc0 = &mshc_0;
> + mmc2 = &sdhci_2;
> + mmc3 = &sdhci_3;
This is actually correct.
> };
>
> chosen {
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index 25e082fda955..45ef7b7ba7e0 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -13,6 +13,11 @@
> #include "exynos-mfc-reserved-memory.dtsi"
>
> / {
> + aliases {
> + mmc0 = &mshc_0;
> + mmc2 = &sdhci_2;
This is also correct.
> + };
For all other cases, where schematics are missing, just make them linear.
Krzysztof
