Hi, Changes in v4: - Addressed comment from Dmitry to move the gpios to the board file. Changes in v3: - Removing the applied patch. - Addressing some of the compile time issues missed in v2. Changes in v2: - Addressing comments from Konrad and Dmitry. - Rebased on top of 6.3-rc1. This series adds the devicetree support for PCIe PHY and PCIe EP on SDX65. The PCIe EP is enabled on SDX65 MTP board. Thanks, Rohit. Rohit Agarwal (5): dt-bindings: PCI: qcom: Add SDX65 SoC ARM: dts: qcom: sdx65: Add support for PCIe PHY ARM: dts: qcom: sdx65: Add support for PCIe EP ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY ARM: dts: qcom: sdx65-mtp: Enable PCIe EP .../devicetree/bindings/pci/qcom,pcie-ep.yaml | 2 + arch/arm/boot/dts/qcom-sdx65-mtp.dts | 50 ++++++++++++- arch/arm/boot/dts/qcom-sdx65.dtsi | 87 ++++++++++++++++++++++ 3 files changed, 136 insertions(+), 3 deletions(-) -- 2.7.4
