Add LEDs definition example for qca8k Switch Family to describe how they
should be defined for a correct usage.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
.../devicetree/bindings/net/dsa/qca8k.yaml | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 389892592aac..2e9c14af0223 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -18,6 +18,8 @@ description:
PHY it is connected to. In this config, an internal mdio-bus is registered and
the MDIO master is used for communication. Mixed external and internal
mdio-bus configurations are not supported by the hardware.
+ Each phy has at least 3 LEDs connected and can be declared
+ using the standard LEDs structure.
properties:
compatible:
@@ -117,6 +119,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
mdio {
#address-cells = <1>;
@@ -226,6 +229,27 @@ examples:
label = "lan1";
phy-mode = "internal";
phy-handle = <&internal_phy_port1>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ default-state = "keep";
+ };
+ };
};
port@2 {
--
2.39.2
