[PATCH 4/5] arm64: dts: rockchip: fix gmac support for NanoPi R5S

[Tianling Shen <cnsztl@xxxxxxxxx>]

- Changed phy-mode to rgmii.

- Fixed pull type in pinctrl for gmac0.

- Removed duplicate properties in mdio node.
  These properties are defined in the gmac0 node already.

Signed-off-by: Tianling Shen <cnsztl@xxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index e9adf5e66529..2a1118f15c29 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -57,7 +57,7 @@
 	assigned-clock-rates = <0>, <125000000>;
 	clock_in_out = "output";
 	phy-handle = <&rgmii_phy0>;
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
 		     &gmac0_tx_bus2
@@ -79,9 +79,6 @@
 		reg = <1>;
 		pinctrl-0 = <&eth_phy0_reset_pin>;
 		pinctrl-names = "default";
-		reset-assert-us = <10000>;
-		reset-deassert-us = <50000>;
-		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -115,7 +112,7 @@
 &pinctrl {
 	gmac0 {
 		eth_phy0_reset_pin: eth-phy0-reset-pin {
-			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
-- 
2.17.1