.
On Wed, Mar 15, 2023 at 6:48 PM Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> wrote:
>
> There is a Cadence USB3 core for JH7110 SoCs, the cdns
> core is the child of this USB wrapper module device.
>
> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> ---
> MAINTAINERS | 7 +
> drivers/usb/cdns3/Kconfig | 11 ++
> drivers/usb/cdns3/Makefile | 1 +
> drivers/usb/cdns3/cdns3-starfive.c | 305 +++++++++++++++++++++++++++++
> 4 files changed, 324 insertions(+)
> create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4263c005e45c..c530c966ab26 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19985,6 +19985,13 @@ F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-pcie-phy.yaml
> F: drivers/phy/starfive/phy-jh7110-pcie.c
> F: drivers/phy/starfive/phy-jh7110-usb.c
>
> +STARFIVE JH71X0 USB DRIVERS
> +M: Emil Renner Berthing <kernel@xxxxxxxx>
> +M: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> +S: Maintained
> +F: Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
> +F: drivers/usb/cdns3/cdns3-starfive.c
> +
> STATIC BRANCH/CALL
> M: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> M: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> index b98ca0a1352a..0a514b591527 100644
> --- a/drivers/usb/cdns3/Kconfig
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -78,6 +78,17 @@ config USB_CDNS3_IMX
>
> For example, imx8qm and imx8qxp.
>
> +config USB_CDNS3_STARFIVE
> + tristate "Cadence USB3 support on StarFive SoC platforms"
> + depends on ARCH_STARFIVE || COMPILE_TEST
> + help
> + Say 'Y' or 'M' here if you are building for StarFive SoCs
> + platforms that contain Cadence USB3 controller core.
> +
> + e.g. JH7110.
> +
> + If you choose to build this driver as module it will
> + be dynamically linked and module will be called cdns3-starfive.ko
> endif
>
> if USB_CDNS_SUPPORT
> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
> index 61edb2f89276..48dfae75b5aa 100644
> --- a/drivers/usb/cdns3/Makefile
> +++ b/drivers/usb/cdns3/Makefile
> @@ -24,6 +24,7 @@ endif
> obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o
> obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
> obj-$(CONFIG_USB_CDNS3_IMX) += cdns3-imx.o
> +obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
>
> cdnsp-udc-pci-y := cdnsp-pci.o
>
> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
> new file mode 100644
> index 000000000000..a99f98f85235
> --- /dev/null
> +++ b/drivers/usb/cdns3/cdns3-starfive.c
> @@ -0,0 +1,305 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
> + *
> + * Copyright (C) 2022 Starfive, Inc.
> + * Author: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
> + * Author: Mason Huo <mason.huo@xxxxxxxxxxxxxxxx>
> + * Author: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <linux/usb/otg.h>
> +#include "core.h"
> +
> +#define USB_STRAP_HOST BIT(17)
> +#define USB_STRAP_DEVICE BIT(18)
> +#define USB_STRAP_MASK GENMASK(18, 16)
> +
> +#define USB_SUSPENDM_HOST BIT(19)
> +#define USB_SUSPENDM_MASK BIT(19)
> +
> +#define USB_SUSPENDM_BYPS BIT(20)
> +#define USB_REFCLK_MODE BIT(23)
> +#define USB_PLL_EN BIT(22)
> +#define USB_PDRSTN_SPLIT BIT(17)
> +
> +#define PCIE_CKREF_SRC_MASK GENMASK(19, 18)
> +#define PCIE_CLK_SEL_MASK GENMASK(21, 20)
> +#define PCIE_PHY_MODE BIT(20)
> +#define PCIE_PHY_MODE_MASK GENMASK(21, 20)
> +#define PCIE_USB3_BUS_WIDTH_MASK GENMASK(3, 2)
> +#define PCIE_USB3_RATE_MASK GENMASK(6, 5)
> +#define PCIE_USB3_RX_STANDBY_MASK BIT(7)
> +#define PCIE_USB3_PHY_ENABLE BIT(4)
> +
> +struct cdns_starfive {
> + struct device *dev;
> + struct regmap *stg_syscon;
> + struct regmap *sys_syscon;
> + struct reset_control *resets;
> + struct clk_bulk_data *clks;
> + int num_clks;
> + u32 sys_offset;
> + u32 stg_offset_4;
> + u32 stg_offset_196;
> + u32 stg_offset_328;
> + u32 stg_offset_500;
> + bool usb2_only;
> +};
> +
> +static int cdns_mode_init(struct platform_device *pdev,
> + struct cdns_starfive *data, const char **out_mode)
> +{
> + struct device_node *child;
> + const char *dr_mode = NULL;
> +
> + child = of_get_compatible_child(pdev->dev.of_node, "cdns,usb3");
> + if (!child) {
> + return dev_err_probe(&pdev->dev, -ENODEV,
> + "Failed to find child node\n");
> + }
> +
> + /* Init usb 2.0 utmi phy */
> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> + USB_SUSPENDM_BYPS, USB_SUSPENDM_BYPS);
> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> + USB_PLL_EN, USB_PLL_EN);
> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> + USB_REFCLK_MODE, USB_REFCLK_MODE);
> +
> + if (!of_find_property(child, "cdns3,usb3-phy", NULL)) {
> + /* Disconnect usb 3.0 phy mode */
> + regmap_update_bits(data->sys_syscon, data->sys_offset,
> + USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
> + data->usb2_only = 1;
> + } else {
> + /* Config usb 3.0 pipe phy */
> + regmap_update_bits(data->stg_syscon, data->stg_offset_196,
> + PCIE_CKREF_SRC_MASK, 0);
> + regmap_update_bits(data->stg_syscon, data->stg_offset_196,
> + PCIE_CLK_SEL_MASK, 0);
> + regmap_update_bits(data->stg_syscon, data->stg_offset_328,
> + PCIE_PHY_MODE_MASK, PCIE_PHY_MODE);
> + regmap_update_bits(data->stg_syscon, data->stg_offset_500,
> + PCIE_USB3_BUS_WIDTH_MASK, 0);
> + regmap_update_bits(data->stg_syscon, data->stg_offset_500,
> + PCIE_USB3_RATE_MASK, 0);
> + regmap_update_bits(data->stg_syscon, data->stg_offset_500,
> + PCIE_USB3_RX_STANDBY_MASK, 0);
> + regmap_update_bits(data->stg_syscon, data->stg_offset_500,
> + PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE);
> +
> + /* Connect usb 3.0 phy mode */
> + regmap_update_bits(data->sys_syscon, data->sys_offset,
> + USB_PDRSTN_SPLIT, 0);
> + }
> +
> + if (!of_property_read_string(child, "dr_mode", &dr_mode)) {
> + if (!strcmp(dr_mode, "host")) {
> + regmap_update_bits(data->stg_syscon,
> + data->stg_offset_4,
> + USB_STRAP_MASK,
> + USB_STRAP_HOST);
> + regmap_update_bits(data->stg_syscon,
> + data->stg_offset_4,
> + USB_SUSPENDM_MASK,
> + USB_SUSPENDM_HOST);
> + } else if (!strcmp(dr_mode, "peripheral")) {
> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> + USB_STRAP_MASK, USB_STRAP_DEVICE);
> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> + USB_SUSPENDM_MASK, 0);
> + }
> + }
> +
> + if (out_mode)
> + *out_mode = dr_mode;
> +
> + return 0;
> +}
> +
> +static int cdns_clk_rst_init(struct cdns_starfive *data)
> +{
> + int ret;
> +
> + data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
> + if (data->num_clks < 0)
> + return dev_err_probe(data->dev, -ENODEV,
> + "Failed to get clocks\n");
> +
> + ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
> + if (ret)
> + return dev_err_probe(data->dev, ret,
> + "failed to enable clocks\n");
> +
> + data->resets = devm_reset_control_array_get_exclusive(data->dev);
> + if (IS_ERR(data->resets)) {
> + ret = dev_err_probe(data->dev, PTR_ERR(data->resets),
> + "Failed to get resets");
> + goto err_clk_init;
> + }
> +
> + ret = reset_control_deassert(data->resets);
> + if (ret) {
> + ret = dev_err_probe(data->dev, ret,
> + "failed to reset clocks\n");
> + goto err_clk_init;
> + }
> +
> + return ret;
> +
> +err_clk_init:
> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
> + return ret;
> +}
> +
> +static int cdns_starfive_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = pdev->dev.of_node;
> + struct cdns_starfive *data;
> + unsigned int args[4];
> + const char *dr_mode;
> + int ret;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, data);
> +
> + data->dev = dev;
> +
> + data->stg_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
> + "starfive,stg-syscon", 4, args);
> +
> + if (IS_ERR(data->stg_syscon))
> + return dev_err_probe(dev, PTR_ERR(data->stg_syscon),
> + "Failed to parse starfive,stg-syscon\n");
> +
> + data->stg_offset_4 = args[0];
> + data->stg_offset_196 = args[1];
> + data->stg_offset_328 = args[2];
> + data->stg_offset_500 = args[3];
> +
> + data->sys_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
> + "starfive,sys-syscon", 1, args);
> + if (IS_ERR(data->sys_syscon))
> + return dev_err_probe(dev, PTR_ERR(data->sys_syscon),
> + "Failed to parse starfive,sys-syscon\n");
> +
> + data->sys_offset = args[0];
> +
> + ret = cdns_mode_init(pdev, data, &dr_mode);
> + if (ret)
> + return ret;
> +
> + ret = cdns_clk_rst_init(data);
> + if (ret)
> + return ret;
> +
> + ret = of_platform_populate(node, NULL, NULL, dev);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to create children\n");
For this error handling, you need to add some paired undo operations
for cdns_clk_rst_init, i.e., reset_control_assert and
clk_bulk_disable_unprepare.
> +
> + device_set_wakeup_capable(dev, true);
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> +
> + dev_info(dev, "usb mode %s %s probe success\n",
> + dr_mode ? dr_mode : "unknown", data->usb2_only ? "2.0" : "3.0");
> +
> + return 0;
> +}
> +
> +static int cdns_starfive_remove_core(struct device *dev, void *c)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> +
> + platform_device_unregister(pdev);
> +
> + return 0;
> +}
> +
> +static int cdns_starfive_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct cdns_starfive *data = dev_get_drvdata(dev);
> +
> + pm_runtime_get_sync(dev);
> + device_for_each_child(dev, NULL, cdns_starfive_remove_core);
> +
> + reset_control_assert(data->resets);
> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
> + pm_runtime_disable(dev);
> + pm_runtime_put_noidle(dev);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int cdns_starfive_resume(struct device *dev)
> +{
> + struct cdns_starfive *data = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
> + if (ret)
> + return ret;
> +
> + ret = reset_control_deassert(data->resets);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int cdns_starfive_suspend(struct device *dev)
> +{
> + struct cdns_starfive *data = dev_get_drvdata(dev);
> +
> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
> + reset_control_assert(data->resets);
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops cdns_starfive_pm_ops = {
> + SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
> + SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
> +};
> +
> +static const struct of_device_id cdns_starfive_of_match[] = {
> + { .compatible = "starfive,jh7110-usb", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
> +
> +static struct platform_driver cdns_starfive_driver = {
> + .probe = cdns_starfive_probe,
> + .remove = cdns_starfive_remove,
> + .driver = {
> + .name = "cdns3-starfive",
> + .of_match_table = cdns_starfive_of_match,
> + .pm = &cdns_starfive_pm_ops,
> + },
> +};
> +module_platform_driver(cdns_starfive_driver);
> +
> +MODULE_ALIAS("platform:cdns3-starfive");
> +MODULE_AUTHOR("YanHong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Mason Huo <mason.huo@xxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");
> --
> 2.17.1
>
