Re: [PATCH 12/15] arm64: dts: qcom: sm6375: Introduce MPM support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 3.03.2023 22:58, Konrad Dybcio wrote:
> Add a node for MPM and wire it up on consumers that use it. This also
> fixes a very bad and sad assumption I made when initially porting this
> SoC that the downstream MPM-TLMM mappings were 1-1. That apparently
> changed some time ago, so with this patch the MPM consumers will actually
> be hooked up to the correct interrupt lines.
> 
> Fixes: 59d34ca97f91 ("arm64: dts: qcom: Add initial device tree for SM6375")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
As agreed with Krzysztof offline, this one is a no-go.
Awaiting resolution on RPM MSG RAM bindings.

Konrad
>  arch/arm64/boot/dts/qcom/sm6375.dtsi | 32 ++++++++++++++++++++++++++------
>  1 file changed, 26 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
> index 94bb373f8d97..ecb654357288 100644
> --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
> @@ -315,6 +315,7 @@ CPU_PD7: power-domain-cpu7 {
>  
>  		CLUSTER_PD: power-domain-cpu-cluster0 {
>  			#power-domain-cells = <0>;
> +			power-domains = <&wakegic>;
>  			domain-idle-states = <&CLUSTER_SLEEP_0>;
>  		};
>  	};
> @@ -633,7 +634,7 @@ tlmm: pinctrl@500000 {
>  			reg = <0 0x00500000 0 0x800000>;
>  			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-ranges = <&tlmm 0 0 157>;
> -			/* TODO: Hook up MPM as wakeup-parent when it's there */
> +			wakeup-parent = <&wakegic>;
>  			interrupt-controller;
>  			gpio-controller;
>  			#interrupt-cells = <2>;
> @@ -755,7 +756,7 @@ spmi_bus: spmi@1c40000 {
>  			      <0 0x01c0a000 0 0x26000>;
>  			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>  			interrupt-names = "periph_irq";
> -			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts-extended = <&wakegic 86 IRQ_TYPE_LEVEL_HIGH>;
>  			qcom,ee = <0>;
>  			qcom,channel = <0>;
>  			#address-cells = <2>;
> @@ -791,6 +792,25 @@ rpm_msg_ram: sram@45f0000 {
>  			reg = <0 0x045f0000 0 0x7000>;
>  		};
>  
> +		wakegic: interrupt-controller@45f01b8 {
> +			compatible = "qcom,mpm";
> +			reg = <0 0x045f01b8 0 0x1000>;
> +			interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
> +			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			#power-domain-cells = <0>;
> +			interrupt-parent = <&intc>;
> +			qcom,mpm-pin-count = <96>;
> +			qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
> +					   <12 422>, /* DWC3 ss_phy_irq */
> +					   <86 183>, /* MPM wake, SPMI */
> +					   <89 314>, /* TSENS0 0C */
> +					   <90 315>, /* TSENS1 0C */
> +					   <93 164>, /* DWC3 dm_hs_phy_irq */
> +					   <94 165>; /* DWC3 dp_hs_phy_irq */
> +		};
> +
>  		sram@4690000 {
>  			compatible = "qcom,rpm-stats";
>  			reg = <0 0x04690000 0 0x400>;
> @@ -1185,10 +1205,10 @@ usb_1: usb@4ef8800 {
>  					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
>  			assigned-clock-rates = <19200000>, <133333333>;
>  
> -			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
> -				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> -				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> -				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&wakegic 12 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&wakegic 93 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&wakegic 94 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "hs_phy_irq",
>  					  "ss_phy_irq",
>  					  "dm_hs_phy_irq",
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux