From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Add GPIO controller nodes to PMICs that have the GPIO hooked up on
sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
index 437cfa8aee2f..9386a113f1f8 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -77,6 +77,16 @@ pmk8775_0_pon_resin: resin {
status = "disabled";
};
};
+
+ pm8775_0_gpios: gpio@8800 {
+ compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pm8775_0_gpios 0 0 12>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
pmk8775_1: pmic@2 {
@@ -98,6 +108,16 @@ pmk8775_2: pmic@4 {
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8775_2_gpios: gpio@8800 {
+ compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pm8775_2_gpios 0 0 12>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
pmk8775_3: pmic@6 {
--
2.37.2
