From: Andrew Lunn <andrew@xxxxxxx>
The WAN port of the 370-RD has a Marvell PHY, with one LED on
the front panel. List this LED in the device tree.
Set the LED default state to "keep" to not change any blink rule
set by default.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
arch/arm/boot/dts/armada-370-rd.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index be005c9f42ef..ccd4699b219f 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -20,6 +20,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
@@ -135,6 +136,19 @@ &mdio {
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "WAN";
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ default-state = "keep";
+ };
+ };
};
switch: switch@10 {
--
2.39.2
