On Tue, 14 Mar 2023 17:25:15 +0530, Vaishnav Achath wrote: > From: Pratyush Yadav <p.yadav@xxxxxx> > > TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate > capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the > parts together. > > Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx> > Signed-off-by: Vaishnav Achath <vaishnav.a@xxxxxx> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > --- > > (no changes since v5) > > Changes in v5: > - Add Laurent's and Rob's R-by. > > Changes in v2: > - Rename to ti,j721e-csi2rx.yaml > - Add an entry in MAINTAINERS. > - Add a description for the binding. > - Change compatible to ti,j721e-csi2rx to make it SoC specific. > - Remove description from dmas, reg, power-domains. > - Remove a limit of 2 from #address-cells and #size-cells. > - Fix add ^ to csi-bridge subnode regex. > - Make ranges mandatory. > - Add unit address in example. > - Add a reference to cdns,csi2rx in csi-bridge subnode. > - Expand the example to include the csi-bridge subnode as well. > - Re-order subject prefixes. > > .../bindings/media/ti,j721e-csi2rx.yaml | 101 ++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 102 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dtb: ticsi2rx@4500000: csi-bridge@4504000: False schema does not allow {'compatible': ['cdns,csi2rx'], 'reg': [[72368128, 4096]], 'clocks': [[4294967295, 26, 2], [4294967295, 26, 0], [4294967295, 26, 2], [4294967295, 26, 2], [4294967295, 26, 3], [4294967295, 26, 3]], 'clock-names': ['sys_clk', 'p_clk', 'pixel_if0_clk', 'pixel_if1_clk', 'pixel_if2_clk', 'pixel_if3_clk'], 'phys': [[4294967295]], 'phy-names': ['dphy'], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[4294967295]], 'bus-type': [[4]], 'clock-lanes': [[0]], 'data-lanes': [[1, 2]]}}}} From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dtb: /example-0/ticsi2rx@4500000/csi-bridge@4504000: failed to match any schema with compatible: ['cdns,csi2rx'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230314115516.667-13-vaishnav.a@xxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
