On 16:58-20230313, Bhavya Kapoor wrote:
> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
> for both instances of 8 channel ADCs for J721s2 SoC.
Drop the second line..
>
> Signed-off-by: Bhavya Kapoor <b-kapoor@xxxxxx>
> ---
>
> Changelog v3->v4:
> - add leading zeroes to reg address to match existing convention
> - change clock names for adc to 'fck'
> - remove spaces from start of line
Please provide links to previous versions of the patches.
>
> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++
> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++
> 2 files changed, 54 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index a7aa6cf08acd..3bc4f28c809f 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -309,3 +309,17 @@ &mcu_mcan1 {
> pinctrl-0 = <&mcu_mcan1_pins_default>;
> phys = <&transceiver2>;
> };
> +
> +&tscadc0 {
> + status = "okay";
> + adc {
> + ti,adc-channels = <0 1 2 3 4 5 6 7>;
> + };
> +};
> +
> +&tscadc1 {
> + status = "okay";
Curious: ADCs work without pinmux? any test log?
> + adc {
> + ti,adc-channels = <0 1 2 3 4 5 6 7>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 0af242aa9816..5da5f0cf7009 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -306,4 +306,44 @@ cpts@3d000 {
> ti,cpts-periodic-outputs = <2>;
> };
> };
> +
> + tscadc0: tscadc@40200000 {
> + compatible = "ti,am3359-tscadc";
> + reg = <0x00 0x40200000 0x00 0x1000>;
> + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 0 0>;
> + assigned-clocks = <&k3_clks 0 2>;
> + assigned-clock-rates = <60000000>;
> + clock-names = "fck";
> + dmas = <&main_udmap 0x7400>,
> + <&main_udmap 0x7401>;
> + dma-names = "fifo0", "fifo1";
> + status = "disabled";
If it works without pinmux, why disable by default?
> +
> + adc {
> + #io-channel-cells = <1>;
> + compatible = "ti,am3359-adc";
> + };
> + };
> +
> + tscadc1: tscadc@40210000 {
> + compatible = "ti,am3359-tscadc";
> + reg = <0x00 0x40210000 0x00 0x1000>;
> + interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 1 0>;
> + assigned-clocks = <&k3_clks 1 2>;
> + assigned-clock-rates = <60000000>;
> + clock-names = "fck";
> + dmas = <&main_udmap 0x7402>,
> + <&main_udmap 0x7403>;
> + dma-names = "fifo0", "fifo1";
> + status = "disabled";
> +
> + adc {
> + #io-channel-cells = <1>;
> + compatible = "ti,am3359-adc";
> + };
> + };
> };
> --
> 2.34.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
