Re: [PATCH v3 3/3] i2c: mpc: Use i2c-scl-clk-low-timeout-ms i2c property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/03/23 12:36, Andi Shyti wrote:
> "fsl,timeout" is marked as deprecated and replaced by the
> "i2c-scl-clk-low-timeout-ms" i2c property.
>
> Use this latter and, in case it is missing, for back
> compatibility, check whether we still have "fsl,timeout" defined.
>
> Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxx>
> Reviewed-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Gave the patches a spin on a P2041RDB so

Tested-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>

> ---
>   drivers/i2c/busses/i2c-mpc.c | 12 +++++++++++-
>   1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index 87e5c1725750..28f11e30ac50 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -843,8 +843,18 @@ static int fsl_i2c_probe(struct platform_device *op)
>   			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
>   	}
>   
> +	/*
> +	 * "fsl,timeout" has been marked as deprecated and, to maintain
> +	 * backward compatibility, we will only look for it if
> +	 * "i2c-scl-clk-low-timeout-ms" is not present.
> +	 */
>   	result = of_property_read_u32(op->dev.of_node,
> -				      "fsl,timeout", &mpc_ops.timeout);
> +				      "i2c-scl-clk-low-timeout-ms",
> +				      &mpc_ops.timeout);
> +	if (result == -EINVAL)
> +		result = of_property_read_u32(op->dev.of_node,
> +					      "fsl,timeout", &mpc_ops.timeout);
> +
>   	if (!result) {
>   		mpc_ops.timeout *= HZ / 1000000;
>   		if (mpc_ops.timeout < 5)




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux