Re: [PATCH V2 22/22] MIPS: Add multiplatform BMIPS target

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Nov 17, 2014 at 8:13 AM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
> This is not just DT, it's actually an implementation of a boot
> interface. The situation here seems much more to what we had on
> PowerPC a long time ago than what we had on ARM before the DT
> conversion. I think the best approach here would be to move the
> platform specific bits into the decompressor code, and allow
> multiple implementations of that. This way you can have the
> generic vmlinux file that has a common DT parser, and you wrap
> that into one decompressor per platform, some of which can have
> their own board detection logic or pre-boot setup where necessary.
>
> To be honest, I think having multiple DT files linked into the
> kernel is a really bad idea, because it doesn't solve the
> scalability problem at all. What we did on ARM was to force those
> hacks out into external projects such as the PXA impedence
> matcher [https://github.com/zonque/pxa-impedance-matcher]. This
> can handle all weird boot protocol and adapt them to the normal
> well-defined interfaces we have in the kernel.

To some extent this is how BCM3384 was done[1].

There is a tradeoff here: to add support for the older platforms it is
easy to build a new DTB file into the kernel image, but it is a lot of
trouble to write a new 3rd stage bootloader.  Do we want to maximize
our list of supported boards, or are we shooting for a super clean
kernel implementation right off the bat?

>> And unless there is one, having a
>> multiplatform kernel does not make much sense, as there is no sane way
>> to tell apart different platforms on boot.
>
> How do you normally tell boards apart on MIPS when you don't use DT?

On BCM7xxx (STB) kernels, we could assume the chip ID was in a known
register, and also we could call back into the bootloader to get a
somewhat-accurate board name.

On BCM63xx there is logic in arch/mips/bcm63xx/cpu.c to try to guess
the chip identity from the CPU type/revision (because the latter can
be read directly from CP0).

These systems were never really designed to support multiplatform
kernels.  The ARM BCM7xxx variants, by contrast, were.


[1] https://github.com/Broadcom/aeolus
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux