On 13/03/23 03:55, Andi Shyti wrote:
> "fsl,timeout" is marked as deprecated and replaced by the
> "i2c-scl-clk-low-timeout-ms" i2c property.
>
> Use this latter and, in case it is missing, for back
> compatibility, check whether we still have "fsl,timeout" defined.
>
> Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-mpc.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index 81ac92bb4f6f..fe6279a353c6 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -846,7 +846,16 @@ static int fsl_i2c_probe(struct platform_device *op)
> mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
> }
>
> - prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
> + prop = of_get_property(op->dev.of_node,
> + "i2c-scl-clk-low-timeout-ms", &plen);
> +
> + /*
> + * ensuring back compatibility as
> + * "fsl,timeout" is marked as deprecated
> + */
> + if (!prop)
> + prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
> +
> if (prop && plen == sizeof(u32)) {
> mpc_ops.timeout = *prop * HZ / 1000000;
> if (mpc_ops.timeout < 5)
While you're here it might make sense to clean this up to use
of_property_read_u32().
With or without that additional cleanup:
Reviewed-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
