It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
drivers/soc/ti/knav_dma.c | 4 ++--
drivers/soc/ti/knav_qmss_acc.c | 2 +-
drivers/soc/ti/knav_qmss_queue.c | 2 +-
drivers/soc/ti/wkup_m3_ipc.c | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c
index 84afebd355be..0fbc37cd5123 100644
--- a/drivers/soc/ti/knav_dma.c
+++ b/drivers/soc/ti/knav_dma.c
@@ -666,8 +666,8 @@ static int dma_init(struct device_node *cloud, struct device_node *dma_node)
dma->rx_priority = DMA_PRIO_DEFAULT;
dma->tx_priority = DMA_PRIO_DEFAULT;
- dma->enable_all = (of_get_property(node, "ti,enable-all", NULL) != NULL);
- dma->loopback = (of_get_property(node, "ti,loop-back", NULL) != NULL);
+ dma->enable_all = of_property_read_bool(node, "ti,enable-all");
+ dma->loopback = of_property_read_bool(node, "ti,loop-back");
ret = of_property_read_u32(node, "ti,rx-retry-timeout", &timeout);
if (ret < 0) {
diff --git a/drivers/soc/ti/knav_qmss_acc.c b/drivers/soc/ti/knav_qmss_acc.c
index fde66e28e046..3d388646ed43 100644
--- a/drivers/soc/ti/knav_qmss_acc.c
+++ b/drivers/soc/ti/knav_qmss_acc.c
@@ -521,7 +521,7 @@ int knav_init_acc_range(struct knav_device *kdev,
info->pdsp = pdsp;
channels = range->num_queues;
- if (of_get_property(node, "multi-queue", NULL)) {
+ if (of_property_read_bool(node, "multi-queue")) {
range->flags |= RANGE_MULTI_QUEUE;
channels = 1;
if (range->queue_base & (32 - 1)) {
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index 48de98560093..0f252c2549ba 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -1264,7 +1264,7 @@ static int knav_setup_queue_range(struct knav_device *kdev,
if (range->num_irqs)
range->flags |= RANGE_HAS_IRQ;
- if (of_get_property(node, "qalloc-by-id", NULL))
+ if (of_property_read_bool(node, "qalloc-by-id"))
range->flags |= RANGE_RESERVED;
if (of_property_present(node, "accumulator")) {
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index 343c58ed5896..6970478b40f3 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -681,7 +681,7 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
dev_warn(dev, "Invalid VTT GPIO(%d) pin\n", temp);
}
- if (of_find_property(np, "ti,set-io-isolation", NULL))
+ if (of_property_read_bool(np, "ti,set-io-isolation"))
wkup_m3_set_io_isolation(m3_ipc);
ret = of_property_read_string(np, "firmware-name",
--
2.39.2
