TI's J7200 SoC has a 5 port Ethernet Switch instance with 4 external ports and 1 host port, referred to as CPSW5G. Add device-tree nodes for CPSW5G and disable it by default. Device-tree overlays will be used to enable it. Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 83 +++++++++++++++++++++++ 1 file changed, 83 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 138381f43ce4..e9d42ae4ed09 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -39,6 +39,13 @@ serdes_ln_ctrl: mux-controller@4080 { <0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */ }; + cpsw0_phy_gmii_sel: phy@4044 { + compatible = "ti,j7200-cpsw5g-phy-gmii-sel"; + ti,qsgmii-main-ports = <1>; + reg = <0x4044 0x10>; + #phy-cells = <1>; + }; + usb_serdes_mux: mux-controller@4000 { compatible = "mmio-mux"; #mux-control-cells = <1>; @@ -304,6 +311,82 @@ cpts@310d0000 { }; }; + cpsw0: ethernet@c000000 { + compatible = "ti,j7200-cpswxg-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x00 0xc000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>; + clocks = <&k3_clks 19 33>; + clock-names = "fck"; + power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_udmap 0xca00>, + <&main_udmap 0xca01>, + <&main_udmap 0xca02>, + <&main_udmap 0xca03>, + <&main_udmap 0xca04>, + <&main_udmap 0xca05>, + <&main_udmap 0xca06>, + <&main_udmap 0xca07>, + <&main_udmap 0x4a00>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + cpsw0_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + }; + + cpsw0_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + }; + + cpsw0_port3: port@3 { + reg = <3>; + ti,mac-only; + label = "port3"; + }; + + cpsw0_port4: port@4 { + reg = <4>; + ti,mac-only; + label = "port4"; + }; + }; + + cpsw5g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 19 33>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 19 16>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ -- 2.25.1