Hello Frank, On Thu, Feb 02, 2023 at 11:00:32AM +0800, Frank Sae wrote: > Add dts for yt8521 and yt8531s, add driver for yt8531. > These patches have been verified on our AM335x platform (motherboard) > which has one integrated yt8521 and one RGMII interface. > It can connect to daughter boards like yt8531s or yt8531 board. Thanks for this series. I test on my jh7110-starfive-visionfive-2-v1.3b Great job! Tested-by: Tommaso Merciai <tomm.merciai@xxxxxxxxx> Regards, Tommaso > > v5: > - change the compatible of yaml > - change the maintainers of yaml from "frank sae" to "Frank Sae" > > v4: > - change default tx delay from 150ps to 1950ps > - add compatible for yaml > > v3: > - change default rx delay from 1900ps to 1950ps > - moved ytphy_rgmii_clk_delay_config_with_lock from yt8521's patch to yt8531's patch > - removed unnecessary checks of phydev->attached_dev->dev_addr > > v2: > - split BIT macro as one patch > - split "dts for yt8521/yt8531s ... " patch as two patches > - use standard rx-internal-delay-ps and tx-internal-delay-ps, removed motorcomm,sds-tx-amplitude > - removed ytphy_parse_dt, ytphy_probe_helper and ytphy_config_init_helper > - not store dts arg to yt8521_priv > > Frank Sae (5): > dt-bindings: net: Add Motorcomm yt8xxx ethernet phy > net: phy: Add BIT macro for Motorcomm yt8521/yt8531 gigabit ethernet > phy > net: phy: Add dts support for Motorcomm yt8521 gigabit ethernet phy > net: phy: Add dts support for Motorcomm yt8531s gigabit ethernet phy > net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy > > .../bindings/net/motorcomm,yt8xxx.yaml | 117 ++++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > MAINTAINERS | 1 + > drivers/net/phy/Kconfig | 2 +- > drivers/net/phy/motorcomm.c | 553 +++++++++++++++--- > 5 files changed, 597 insertions(+), 78 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml > > -- > 2.34.1 >
