All the clocks are enabled and disabled at the same time. So the bulk clock APIs can be used to handle them together. This simplifies the code a lot. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- drivers/pci/controller/dwc/pcie-qcom.c | 72 +++++++------------------- 1 file changed, 19 insertions(+), 53 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 2d9116464842..0bb27d3c95a0 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -145,11 +145,9 @@ #define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0)) +#define QCOM_PCIE_1_0_0_MAX_CLOCKS 4 struct qcom_pcie_resources_1_0_0 { - struct clk *iface; - struct clk *aux; - struct clk *master_bus; - struct clk *slave_bus; + struct clk_bulk_data clks[QCOM_PCIE_1_0_0_MAX_CLOCKS]; struct reset_control *core; struct regulator *vdda; }; @@ -439,26 +437,20 @@ static int qcom_pcie_get_resources_1_0_0(struct qcom_pcie *pcie) struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0; struct dw_pcie *pci = pcie->pci; struct device *dev = pci->dev; + int ret; res->vdda = devm_regulator_get(dev, "vdda"); if (IS_ERR(res->vdda)) return PTR_ERR(res->vdda); - res->iface = devm_clk_get(dev, "iface"); - if (IS_ERR(res->iface)) - return PTR_ERR(res->iface); - - res->aux = devm_clk_get(dev, "aux"); - if (IS_ERR(res->aux)) - return PTR_ERR(res->aux); - - res->master_bus = devm_clk_get(dev, "master_bus"); - if (IS_ERR(res->master_bus)) - return PTR_ERR(res->master_bus); + res->clks[0].id = "iface"; + res->clks[1].id = "aux"; + res->clks[2].id = "master_bus"; + res->clks[3].id = "slave_bus"; - res->slave_bus = devm_clk_get(dev, "slave_bus"); - if (IS_ERR(res->slave_bus)) - return PTR_ERR(res->slave_bus); + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); + if (ret < 0) + return ret; res->core = devm_reset_control_get_exclusive(dev, "core"); return PTR_ERR_OR_ZERO(res->core); @@ -469,10 +461,7 @@ static void qcom_pcie_deinit_1_0_0(struct qcom_pcie *pcie) struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0; reset_control_assert(res->core); - clk_disable_unprepare(res->slave_bus); - clk_disable_unprepare(res->master_bus); - clk_disable_unprepare(res->iface); - clk_disable_unprepare(res->aux); + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); regulator_disable(res->vdda); } @@ -489,46 +478,23 @@ static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie) return ret; } - ret = clk_prepare_enable(res->aux); - if (ret) { - dev_err(dev, "cannot prepare/enable aux clock\n"); - goto err_res; - } - - ret = clk_prepare_enable(res->iface); - if (ret) { - dev_err(dev, "cannot prepare/enable iface clock\n"); - goto err_aux; - } - - ret = clk_prepare_enable(res->master_bus); - if (ret) { - dev_err(dev, "cannot prepare/enable master_bus clock\n"); - goto err_iface; - } - - ret = clk_prepare_enable(res->slave_bus); + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); if (ret) { - dev_err(dev, "cannot prepare/enable slave_bus clock\n"); - goto err_master; + dev_err(dev, "cannot prepare/enable clocks\n"); + goto err_assert_reset; } ret = regulator_enable(res->vdda); if (ret) { dev_err(dev, "cannot enable vdda regulator\n"); - goto err_slave; + goto err_disable_clks; } return 0; -err_slave: - clk_disable_unprepare(res->slave_bus); -err_master: - clk_disable_unprepare(res->master_bus); -err_iface: - clk_disable_unprepare(res->iface); -err_aux: - clk_disable_unprepare(res->aux); -err_res: + +err_disable_clks: + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); +err_assert_reset: reset_control_assert(res->core); return ret; -- 2.25.1