The following series of patches add support for the following on J721S2 common processor board, - USB - SerDes - OSPI - PCIe Changes from v12: * Disabled only the nodes that need additonal info Changes from v11: * Cleaned up comments for disabled nodes * Removed deprecated properties for flash node Changes from v10: * Removed the ti,j721e-system-controller bindings document patch introduced in v9 * Updated mux-controller node with "reg" property to fix dtbs warnings * For the nodes which are disabled by default, added comments to provide the reason behind it * Dropped Link tags in all patches Changes from v9: * Disabled nodes in main.dtsi and enable them in the board specific DT file Changes from v8: * Update the ti,j721e-system-controller bindings document * Fix dtbs warnings Changes from v7: * Fix node names as per bindings document Changes from v6: * Changes to ti,j721s2-wiz-10g compatible string from ti,am64-wiz-10g but requires this series to be merged first Ref: https://lore.kernel.org/linux-arm-kernel/20221122092203.762308-1-mranostay@xxxxxx/ * Removed unused pcie1_ep based on feedback * Switch from incorrect "ti,j721e-system-controller", "syscon", "simple-mfd" compatible for SPI node to "simple-bus" Changes from v5: * Removed Cc from commit messages to reduce clutter * Squashed changes for device tree nodes that get modified latter in the patchset series Changes from v4: * Add my Signed-off-by lines to all patchsets Changes from v3: * Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes' * Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and send it own series to avoid a dependency that would hold up other patches in this series. Changes from v2: * Added PCIe RC + EP enablement patchsets * Added device-id for j722s2 PCIe host in dt documentation * Reworked SERDES + WIZ enablement patchset to use properies for clocks defines versus entire devicetree nodes. Results in cleaner code that doesn't break dt-schema or the driver functionality. Changes from v1: * Resolve issues with dt schema reporting * Minor changes related to consistency on node naming and value v12: https://lore.kernel.org/all/20230301091136.17862-1-r-gunasekaran@xxxxxx/ v11: https://lore.kernel.org/all/20230224102438.6541-1-r-gunasekaran@xxxxxx/ v10: https://lore.kernel.org/all/20230221120612.27366-1-r-gunasekaran@xxxxxx/ v9: https://lore.kernel.org/all/20230220111408.9476-1-r-gunasekaran@xxxxxx/ v8: https://lore.kernel.org/all/20230123095733.31657-1-r-gunasekaran@xxxxxx/ v7: https://lore.kernel.org/all/20221122101616.770050-1-mranostay@xxxxxx/ v6: https://lore.kernel.org/all/20221119040906.9495-1-mranostay@xxxxxx/ v5: https://lore.kernel.org/all/20221103044125.172864-1-mranostay@xxxxxx/ v4: https://lore.kernel.org/all/20221101033204.33048-1-mranostay@xxxxxx/ v3: https://lore.kernel.org/all/20220921031327.4135-1-mranostay@xxxxxx/ v2: https://lore.kernel.org/all/20220908011911.3319-1-mranostay@xxxxxx/ v1: https://lore.kernel.org/all/20220125131113.727-1-a-govindraju@xxxxxx/ Aswath Govindraju (7): arm64: dts: ti: k3-j721s2-main: Add support for USB arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Matt Ranostay (1): arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node .../dts/ti/k3-j721s2-common-proc-board.dts | 87 +++++++++++ arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 145 ++++++++++++++++++ .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 44 ++++++ arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 41 +++++ 4 files changed, 317 insertions(+) base-commit: 2c6433e9294b6d0f4d8f08c3c70a3eac434d3ec8 -- 2.17.1
