On Wed, 08 Mar 2023 16:27:58 +0800, Minda Chen wrote: > Add StarFive JH7110 SoC USB 3.0 phy dt-binding. > USB controller is cadence USB 3.0 IP. > > Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> > --- > .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++ > 1 file changed, 158 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dtb: usb@10100000: phy-names:1: 'anyOf' conditional failed, one must be fixed: 'cdns3,usb2-phy' was expected 'cdns3,usb3-phy' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/cdns,usb3.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dtb: usb@10100000: 'phys' is a dependency of 'phy-names' From schema: /usr/local/lib/python3.10/dist-packages/dtschema/schemas/phy/phy-consumer.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230308082800.3008-2-minda.chen@xxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
