Re: [PATCH V4 2/2] nvmem: add generic driver for devices with MMIO access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rafał,


Thanks for doing this,

On 28/02/2023 07:29, Rafał Miłecki wrote:
From: Rafał Miłecki <rafal@xxxxxxxxxx>

Some NVMEM devices can be accessed by simply mapping memory and reading
from / writing to it. This driver adds support for a generic
"mmio-nvmem" DT binding used by such devices.

One of such devices is Broadcom's NVRAM. It's already supported (see
NVMEM_BRCM_NVRAM) but existing driver covers both:

What will happen to the old "brcm,nvram" compatible and the dt firmware that already have this node?


If there is only one user for this then one would object that why do we need this DT level of abstraction to start with?
If this is not the case please consider adding those patches to this series.


1. NVMEM device access
2. NVMEM content parsing

Once we get support for NVMEM layouts then existing NVRAM driver will
get converted into a layout and generic driver will take over
responsibility for data access.


Even though this series is simple, but it is really confusing for two reasons.

1> Generic mmio nvmem bindings are incomplete and potentially change/evolve on every new user. Ex clks, regulators, endianess ... So it looks really fragile and incomplete to me as a generic bindings.
Is this want you are expecting?


2> As you mentioned that this will replace broadcom NVMRAM, but this patch does nothing in relation to updating that driver, so the code is dead as it is. If you are considering to use it for Broadcom NVMRAM, please add those patches to this series so that we could see the real user for this code.

--srini

Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
V3: Support "reg-io-width", basic writing & "brcm,nvram" string
V3: Don't duplicate core checks, add 64 b support, complete writing
     support, don't add confusing conditional "brcm,nvram" support (it
     will be handled with layouts migration)
---
  drivers/nvmem/Kconfig  |  10 +++
  drivers/nvmem/Makefile |   2 +
  drivers/nvmem/mmio.c   | 148 +++++++++++++++++++++++++++++++++++++++++
  3 files changed, 160 insertions(+)
  create mode 100644 drivers/nvmem/mmio.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 6dec38805041..189ea85bd67d 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -166,6 +166,16 @@ config NVMEM_MICROCHIP_OTPC
  	  This driver enable the OTP controller available on Microchip SAMA7G5
  	  SoCs. It controls the access to the OTP memory connected to it.
+config NVMEM_MMIO
+	tristate "MMIO access based NVMEM support"
+	depends on HAS_IOMEM
+	help
+	  This driver provides support for NVMEM devices that can be accessed
+	  using MMIO.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-mmio.
+
  config NVMEM_MTK_EFUSE
  	tristate "Mediatek SoCs EFUSE support"
  	depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 6a1efffa88f0..767a9db2bfc1 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -35,6 +35,8 @@ obj-$(CONFIG_NVMEM_MESON_MX_EFUSE)	+= nvmem_meson_mx_efuse.o
  nvmem_meson_mx_efuse-y			:= meson-mx-efuse.o
  obj-$(CONFIG_NVMEM_MICROCHIP_OTPC)	+= nvmem-microchip-otpc.o
  nvmem-microchip-otpc-y			:= microchip-otpc.o
+obj-$(CONFIG_NVMEM_MMIO)		+= nvmem-mmio.o
+nvmem-mmio-y				:= mmio.o
  obj-$(CONFIG_NVMEM_MTK_EFUSE)		+= nvmem_mtk-efuse.o
  nvmem_mtk-efuse-y			:= mtk-efuse.o
  obj-$(CONFIG_NVMEM_MXS_OCOTP)		+= nvmem-mxs-ocotp.o
diff --git a/drivers/nvmem/mmio.c b/drivers/nvmem/mmio.c
new file mode 100644
index 000000000000..ce51648bb321
--- /dev/null
+++ b/drivers/nvmem/mmio.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Rafał Miłecki <rafal@xxxxxxxxxx>
+ */
+
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+struct mmio_nvmem {
+	void __iomem *base;
+	u32 io_width;
+};
+
+static int mmio_nvmem_read(void *context, unsigned int offset, void *val, size_t bytes)
+{
+	struct mmio_nvmem *priv = context;
+	u64 __maybe_unused *dst64;
+	u32 *dst32;
+	u16 *dst16;
+	u8 *dst8;
+
+	switch (priv->io_width) {
+	case 0:
+		memcpy_fromio(val, priv->base + offset, bytes);
+		break;
+	case 1:
+		for (dst8 = val; bytes; bytes -= 1, offset += 1)
+			*dst8++ = readb(priv->base + offset);
+		break;
+	case 2:
+		for (dst16 = val; bytes; bytes -= 2, offset += 2)
+			*dst16++ = readw(priv->base + offset);
+		break;
+	case 4:
+		for (dst32 = val; bytes; bytes -= 4, offset += 4)
+			*dst32++ = readl(priv->base + offset);
+		break;
+#ifdef CONFIG_64BIT
+	case 8:
+		for (dst64 = val; bytes; bytes -= 8, offset += 8)
+			*dst64++ = readq(priv->base + offset);
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mmio_nvmem_write(void *context, unsigned int offset, void *val, size_t bytes)
+{
+	struct mmio_nvmem *priv = context;
+	u64 __maybe_unused *dst64;
+	u32 *dst32;
+	u16 *dst16;
+	u8 *dst8;
+
+	switch (priv->io_width) {
+	case 0:
+		memcpy_toio(priv->base + offset, val, bytes);
+		break;
+	case 1:
+		for (dst8 = val; bytes; bytes -= 1, offset += 1)
+			writeb(*dst8++, priv->base + offset);
+		break;
+	case 2:
+		for (dst16 = val; bytes; bytes -= 2, offset += 2)
+			writew(*dst16++, priv->base + offset);
+		break;
+	case 4:
+		for (dst32 = val; bytes; bytes -= 4, offset += 4)
+			writel(*dst32++, priv->base + offset);
+		break;
+#ifdef CONFIG_64BIT
+	case 8:
+		for (dst64 = val; bytes; bytes -= 8, offset += 8)
+			writeq(*dst64++, priv->base + offset);
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mmio_nvmem_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.name = "mmio-nvmem",
+		.id = NVMEM_DEVID_AUTO,
+		.read_only = true,
+		.reg_read = mmio_nvmem_read,
+		.reg_write = mmio_nvmem_write,
+	};
+	struct device *dev = &pdev->dev;
+	struct mmio_nvmem *priv;
+	struct resource *res;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	of_property_read_u32(dev->of_node, "reg-io-width", &priv->io_width);
+
+	config.dev = dev;
+	config.size = resource_size(res);
+	config.word_size = priv->io_width;
+	config.stride = priv->io_width;
+	config.priv = priv;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static const struct of_device_id mmio_nvmem_of_match_table[] = {
+	{ .compatible = "mmio-nvmem", },
+	{},
+};
+
+static struct platform_driver mmio_nvmem_driver = {
+	.probe = mmio_nvmem_probe,
+	.driver = {
+		.name = "mmio_nvmem",
+		.of_match_table = mmio_nvmem_of_match_table,
+	},
+};
+
+static int __init mmio_nvmem_init(void)
+{
+	return platform_driver_register(&mmio_nvmem_driver);
+}
+
+subsys_initcall_sync(mmio_nvmem_init);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, mmio_nvmem_of_match_table);



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux