Re: [PATCH v3 2/2] drm/panel: Add driver for Novatek NT36523

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8.03.2023 05:37, Jianhua Lu wrote:
> Add a driver for panels using the Novatek NT36523 display driver IC.
> 
> Signed-off-by: Jianhua Lu <lujianhua000@xxxxxxxxx>
> ---
> Changes in v3:
>   - Refactor source code
> 
> Changes in v2:
>   - Refactor and clean up source code
This is a veeery vague changelog, akin to "change patch", please
be more specific the next time around.


[...]

> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-novatek-nt36523.c
> @@ -0,0 +1,770 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Novatek NT36523 DriverIC panels driver
> + *
> + * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@xxxxxxxxx>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#define DSI_NUM_MIN 1
> +
> +/* Macro modified from mipi_dual_dsi_dcs_write_seq */
> +#define mipi_dual_dsi_dcs_write_seq(dsi, cmd, seq...)           	   \
> +	do {                                                               \
> +		static const u8 d[] = { cmd, seq };                        \
> +		int i, ret;                                                \
> +		for (i = 0; i < ARRAY_SIZE(dsi); i++) {                    \
> +			ret = mipi_dsi_dcs_write_buffer(dsi[i], d, ARRAY_SIZE(d));    \
> +			if (ret < 0) {                                             \
> +				dev_err_ratelimited(                               \
> +					&dsi[i]->dev, "sending command %#02x failed: %d\n", \
> +					cmd, ret);                                 \
> +				return ret;                                        \
> +			}                                                          \
> +		}                                                                  \
> +	} while (0)
> +
This should definitely be put in a common file..


> +static const struct drm_display_mode elish_boe_mode = {
> +	/* Current max freqency is 104HZ, TODO 120HZ */
Is it a DPU issue, or does the panel not work correctly when you
jack up the clocks? Did you use the correct init sequence and porches
for the 120Hz mode, including the mode switch command set?

Could you also implement a 60 (or whatever other value is also
implemented downstream) Hz mode?

> +	.clock = (1600 + 60 + 8 + 60) * (2560 + 26 + 4 + 168) * 104 / 1000,
> +	.hdisplay = 1600,
> +	.hsync_start = 1600 + 60,
> +	.hsync_end = 1600 + 60 + 8,
> +	.htotal = 1600 + 60 + 8 + 60,
> +	.vdisplay = 2560,
> +	.vsync_start = 2560 + 26,
> +	.vsync_end = 2560 + 26 + 4,
> +	.vtotal = 2560 + 26 + 4 + 168,
> +};
> +
> +static const struct drm_display_mode elish_csot_mode = {
> +	/* Current max freqency is 104HZ, TODO 120HZ */
> +	.clock = (1600 + 200 + 40 + 52) * (2560 + 26 + 4 + 168) * 104 / 1000,
> +	.hdisplay = 1600,
> +	.hsync_start = 1600 + 200,
> +	.hsync_end = 1600 + 200 + 40,
> +	.htotal = 1600 + 200 + 40 + 52,
> +	.vdisplay = 2560,
> +	.vsync_start = 2560 + 26,
> +	.vsync_end = 2560 + 26 + 4,
> +	.vtotal = 2560 + 26 + 4 + 168,
> +};
> +
> +static const struct panel_desc elish_boe_desc = {
> +	.modes = &elish_boe_mode,
> +	.dsi_info = {
> +		.type = "NT36523",
That's a bit vague, the driver IC is not very telling about the
panel itself. Since we're not able to determine much more information,
this could contain the panel manufacturer and the device name.

> +		.channel = 0,
> +		.node = NULL,
> +	},
> +	.width_mm = 127,
> +	.height_mm = 203,
> +	.bpc = 8,
> +	.lanes = 3,
> +	.format = MIPI_DSI_FMT_RGB888,
> +	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
> +	.init_sequence = elish_boe_init_sequence,
> +	.is_dual_dsi = true,
> +};
> +
[...]

> +static int nt36523_probe(struct mipi_dsi_device *dsi)
> +{
[...]

> +	/* If the panel is dual dsi, register DSI1 */
> +	if (pinfo->desc->is_dual_dsi) {
> +		info = &pinfo->desc->dsi_info;
> +
> +		dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
> +		if (!dsi1) {
> +			dev_err(dev, "cannot get secondary DSI node.\n");
> +			return -ENODEV;
> +		}
> +
> +		dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
> +		of_node_put(dsi1);
Shouldn't you put the reference only if it's found?

> +		if (!dsi1_host) {
> +			dev_err(dev, "cannot get secondary DSI host\n");
> +			return -EPROBE_DEFER;
dev_err_probe, here and in neighbouring exit return paths?


Konrad
> +		}
> +
> +		pinfo->dsi[1] = mipi_dsi_device_register_full(dsi1_host, info);
> +		if (!pinfo->dsi[1]) {
> +			dev_err(dev, "cannot get secondary DSI device\n");
> +			return -ENODEV;
> +		}
> +	}
> +
> +	pinfo->dsi[0] = dsi;
> +	mipi_dsi_set_drvdata(dsi, pinfo);
> +	drm_panel_init(&pinfo->panel, dev, &nt36523_panel_funcs, DRM_MODE_CONNECTOR_DSI);
> +
> +	ret = drm_panel_of_backlight(&pinfo->panel);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to get backlight\n");
> +
> +	drm_panel_add(&pinfo->panel);
> +
> +	for (i = 0; i < DSI_NUM_MIN + pinfo->desc->is_dual_dsi; i++) {
> +		pinfo->dsi[i]->lanes = pinfo->desc->lanes;
> +		pinfo->dsi[i]->format = pinfo->desc->format;
> +		pinfo->dsi[i]->mode_flags = pinfo->desc->mode_flags;
> +
> +		ret = mipi_dsi_attach(pinfo->dsi[i]);
> +		if (ret < 0)
> +			return dev_err_probe(dev, ret, "cannot attach to DSI%d host.\n", i);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id nt36523_of_match[] = {
> +	{
> +		.compatible = "xiaomi,elish-boe-nt36523",
> +		.data = &elish_boe_desc,
> +	},
> +	{
> +		.compatible = "xiaomi,elish-csot-nt36523",
> +		.data = &elish_csot_desc,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, nt36523_of_match);
> +
> +static struct mipi_dsi_driver nt36523_driver = {
> +	.probe = nt36523_probe,
> +	.remove = nt36523_remove,
> +	.driver = {
> +		.name = "panel-novatek-nt36523",
> +		.of_match_table = nt36523_of_match,
> +	},
> +};
> +module_mipi_dsi_driver(nt36523_driver);
> +
> +MODULE_AUTHOR("Jianhua Lu <lujianhua000@xxxxxxxxx>");
> +MODULE_DESCRIPTION("DRM driver for Novatek NT36523 based MIPI DSI panels");
> +MODULE_LICENSE("GPL");



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux