Update bindings to include Serdes PHY as an optional PHY, in addition to the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the Serdes PHY is optional. The Serdes PHY handle has to be provided only when the Serdes is being configured in a Single-Link protocol. Using the name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss driver can obtain the Serdes PHY and request the Serdes to be configured. Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx> --- Hello, This patch corresponds to the Serdes PHY bindings that were missed out in the series at: https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@xxxxxx/ This was pointed out at: https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@xxxxxxxxxxxxxx/ Changes from v1: 1. Describe phys property with minItems, items and description. 2. Use minItems and items in phy-names. 3. Remove the description in phy-names. v1: https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@xxxxxx/ .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 900063411a20..0fb48bb6a041 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -126,8 +126,18 @@ properties: description: CPSW port number phys: - maxItems: 1 - description: phandle on phy-gmii-sel PHY + minItems: 1 + items: + - description: CPSW MAC's PHY. + - description: Serdes PHY. Serdes PHY is required only if + the Serdes has to be configured in the + Single-Link configuration. + + phy-names: + minItems: 1 + items: + - const: mac-phy + - const: serdes-phy label: description: label associated with this port -- 2.25.1
