The firmware name for this core should stay as the default name "j7-main-r5f0_0-fw". This is expected to by a symlink to the actual firmware file. If one wants to use a different firmware they should change where the symlink points. This is usually achieved with an update-alternative or other distro specific selection mechanisms. The actual selection is policy and does not belong in DT. Remove this name override. Signed-off-by: Andrew Davis <afd@xxxxxx> --- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 4640d280c85c..f650a7fd66b4 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -687,10 +687,6 @@ &wkup_gpio1 { status = "disabled"; }; -&main_r5fss0_core0{ - firmware-name = "pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"; -}; - &usb_serdes_mux { idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ }; -- 2.39.2