On 2023/3/7 17:03, Krzysztof Kozlowski wrote: > On 06/03/2023 15:04, Walker Chen wrote: >> The DMA controller needs two reset items to work properly on JH7110 SoC, >> so there is need to constrain the items' value to 2, other platforms >> have 1 reset item at most. >> >> Signed-off-by: Walker Chen <walker.chen@xxxxxxxxxxxxxxxx> >> --- >> .../bindings/dma/snps,dw-axi-dmac.yaml | 24 +++++++++++++++---- >> 1 file changed, 20 insertions(+), 4 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml >> index ad107a4d3b33..d8b5439f215c 100644 >> --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml >> +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml >> @@ -12,14 +12,12 @@ maintainers: >> description: >> Synopsys DesignWare AXI DMA Controller DT Binding >> >> -allOf: >> - - $ref: "dma-controller.yaml#" >> - >> properties: >> compatible: >> enum: >> - snps,axi-dma-1.01a >> - intel,kmb-axi-dma >> + - starfive,jh7110-axi-dma >> >> reg: >> minItems: 1 >> @@ -58,7 +56,8 @@ properties: >> maximum: 8 >> >> resets: >> - maxItems: 1 >> + minItems: 1 >> + maxItems: 2 >> >> snps,dma-masters: >> description: | >> @@ -109,6 +108,23 @@ required: >> - snps,priority >> - snps,block-size >> >> +allOf: >> + - $ref: "dma-controller.yaml#" > > Rebase your patches on something recent... I would argue that it should > be based on maintainer's (or linux-next) tree, but that would be too > good to be true. This was written by referring to the syntax of other dt-binding, but your suggestion is a good one, the next version of patches will be rebased on kernel 6.3. > >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - starfive,jh7110-axi-dma >> + then: >> + properties: >> + resets: >> + minItems: 2 > > What are the items expected here? Do you mean to add descriptions for items here ? Thanks! Best regards, Walker