On Mon, 6 Mar 2023 at 10:55, Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> wrote:
>
> USB phy dts configuration. Also includes Cadence USB
> subnode configuration.
>
> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> ---
> .../jh7110-starfive-visionfive-2.dtsi | 6 +++
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 39 +++++++++++++++++++
> 2 files changed, 45 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index e8b8f4346fdd..2a9ed8b9ee25 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -244,3 +244,9 @@
> };
> };
> };
> +
> +&usb0 {
> + starfive,usb2-only;
> + dr_mode = "peripheral";
> + status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index be180f23963e..ee665cdc3510 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -628,5 +628,44 @@
> starfive,sysreg = <&sys_syscon 0x9c 0x1 0x3e>;
> status = "disabled";
> };
> +
> + usb0: usbphy@10200000 {
Please keep the nodes sorted by the address after @
> + compatible = "starfive,jh7110-usb";
> + reg = <0x0 0x10210000 0x0 0x1000>,
> + <0x0 0x10200000 0x0 0x1000>;
> + reg-names = "usb3", "usb2";
> + clocks = <&syscrg JH7110_SYSCLK_USB_125M>,
> + <&stgcrg JH7110_STGCLK_USB0_APP_125>,
> + <&stgcrg JH7110_STGCLK_USB0_LPM>,
> + <&stgcrg JH7110_STGCLK_USB0_STB>,
> + <&stgcrg JH7110_STGCLK_USB0_APB>,
> + <&stgcrg JH7110_STGCLK_USB0_AXI>,
> + <&stgcrg JH7110_STGCLK_USB0_UTMI_APB>;
> + clock-names = "usb_125m", "usb0_app_125", "usb0_lpm",
> + "usb0_stb", "usb0_apb", "usb0_axi", "usb0_utmi_apb";
> + resets = <&stgcrg JH7110_STGRST_USB0_PWRUP>,
> + <&stgcrg JH7110_STGRST_USB0_APB>,
> + <&stgcrg JH7110_STGRST_USB0_AXI>,
> + <&stgcrg JH7110_STGRST_USB0_UTMI_APB>;
> + starfive,stg-syscon = <&stg_syscon 0x4 0xc4 0x148 0x1f4>;
> + starfive,sys-syscon = <&sys_syscon 0x18>;
> + status = "disabled";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + #phy-cells = <0>;
> + ranges;
Please add an empty line here.
> + usbdrd_cdns3: usb@10100000 {
> + compatible = "cdns,usb3";
> + reg = <0x0 0x10100000 0x0 0x10000>,
> + <0x0 0x10110000 0x0 0x10000>,
> + <0x0 0x10120000 0x0 0x10000>;
> + reg-names = "otg", "xhci", "dev";
> + interrupts = <100>, <108>, <110>;
> + interrupt-names = "host", "peripheral", "otg";
> + phy-names = "cdns3,usb3-phy", "cnds3,usb2-phy";
> + maximum-speed = "super-speed";
> + };
> + };
> };
> };
> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv
