Re: [PATCH 05/20] pinctrl: ralink: move to mediatek as mtmips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 6, 2023 at 4:06 PM Arınç ÜNAL <arinc.unal@xxxxxxxxxx> wrote:
>
> On 6.03.2023 17:07, Sergio Paracuellos wrote:
> > On Fri, Mar 3, 2023 at 3:18 PM Arınç ÜNAL <arinc.unal@xxxxxxxxxx> wrote:
> >>
> >> Heyo,
> >>
> >> On 3.03.2023 13:57, Sergio Paracuellos wrote:
> >>> Hi Arınç,
> >>>
> >>> On Fri, Mar 3, 2023 at 9:16 AM Arınç ÜNAL <arinc.unal@xxxxxxxxxx> wrote:
> >>>>
> >>>> Hey Sergio,
> >>>>
> >>>> On 3.03.2023 09:34, Sergio Paracuellos wrote:
> >>>>> On Fri, Mar 3, 2023 at 7:17 AM Sergio Paracuellos
> >>>>> <sergio.paracuellos@xxxxxxxxx> wrote:
> >>>>>>
> >>>>>>     Hi Arınç,
> >>>>>>
> >>>>>> On Fri, Mar 3, 2023 at 1:30 AM <arinc9.unal@xxxxxxxxx> wrote:
> >>>>>>>
> >>>>>>> From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
> >>>>>>>
> >>>>>>> This platform from Ralink was acquired by MediaTek in 2011. Then, MediaTek
> >>>>>>> introduced new SoCs which utilise this platform. Move the driver to
> >>>>>>> mediatek pinctrl directory. Rename the ralink core driver to mtmips.
> >>>>>>>
> >>>>>>> Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
> >>>>>>> ---
> >>>>>>>     drivers/pinctrl/Kconfig                       |  1 -
> >>>>>>>     drivers/pinctrl/Makefile                      |  1 -
> >>>>>>>     drivers/pinctrl/mediatek/Kconfig              | 51 ++++++++++-
> >>>>>>>     drivers/pinctrl/mediatek/Makefile             | 63 +++++++------
> >>>>>>>     .../{ralink => mediatek}/pinctrl-mt7620.c     | 34 +++----
> >>>>>>>     .../{ralink => mediatek}/pinctrl-mt7621.c     | 30 +++----
> >>>>>>>     .../{ralink => mediatek}/pinctrl-mt76x8.c     | 60 ++++++-------
> >>>>>>>     .../pinctrl-mtmips.c}                         | 90 +++++++++----------
> >>>>>>>     .../pinctrl-mtmips.h}                         | 16 ++--
> >>>>>>>     .../{ralink => mediatek}/pinctrl-rt2880.c     | 20 ++---
> >>>>>>>     .../{ralink => mediatek}/pinctrl-rt305x.c     | 44 ++++-----
> >>>>>>>     .../{ralink => mediatek}/pinctrl-rt3883.c     | 28 +++---
> >>>>>>>     drivers/pinctrl/ralink/Kconfig                | 40 ---------
> >>>>>>>     drivers/pinctrl/ralink/Makefile               |  9 --
> >>>>>>>     14 files changed, 246 insertions(+), 241 deletions(-)
> >>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-mt7620.c (81%)
> >>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-mt7621.c (80%)
> >>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-mt76x8.c (81%)
> >>>>>>>     rename drivers/pinctrl/{ralink/pinctrl-ralink.c => mediatek/pinctrl-mtmips.c} (74%)
> >>>>>>>     rename drivers/pinctrl/{ralink/pinctrl-ralink.h => mediatek/pinctrl-mtmips.h} (75%)
> >>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-rt2880.c (71%)
> >>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-rt305x.c (75%)
> >>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-rt3883.c (80%)
> >>>>>>>     delete mode 100644 drivers/pinctrl/ralink/Kconfig
> >>>>>>>     delete mode 100644 drivers/pinctrl/ralink/Makefile
> >>>>>>>
> >>>>>>> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> >>>>>>> index dcb53c4a9584..8a6012770640 100644
> >>>>>>> --- a/drivers/pinctrl/Kconfig
> >>>>>>> +++ b/drivers/pinctrl/Kconfig
> >>>>>>> @@ -537,7 +537,6 @@ source "drivers/pinctrl/nomadik/Kconfig"
> >>>>>>>     source "drivers/pinctrl/nuvoton/Kconfig"
> >>>>>>>     source "drivers/pinctrl/pxa/Kconfig"
> >>>>>>>     source "drivers/pinctrl/qcom/Kconfig"
> >>>>>>> -source "drivers/pinctrl/ralink/Kconfig"
> >>>>>>>     source "drivers/pinctrl/renesas/Kconfig"
> >>>>>>>     source "drivers/pinctrl/samsung/Kconfig"
> >>>>>>>     source "drivers/pinctrl/spear/Kconfig"
> >>>>>>> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> >>>>>>> index d5939840bb2a..ada6ed1d4e91 100644
> >>>>>>> --- a/drivers/pinctrl/Makefile
> >>>>>>> +++ b/drivers/pinctrl/Makefile
> >>>>>>> @@ -66,7 +66,6 @@ obj-y                         += nomadik/
> >>>>>>>     obj-y                          += nuvoton/
> >>>>>>>     obj-$(CONFIG_PINCTRL_PXA)      += pxa/
> >>>>>>>     obj-$(CONFIG_ARCH_QCOM)                += qcom/
> >>>>>>> -obj-$(CONFIG_PINCTRL_RALINK)   += ralink/
> >>>>>>>     obj-$(CONFIG_PINCTRL_RENESAS)  += renesas/
> >>>>>>>     obj-$(CONFIG_PINCTRL_SAMSUNG)  += samsung/
> >>>>>>>     obj-$(CONFIG_PINCTRL_SPEAR)    += spear/
> >>>>>>> diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
> >>>>>>> index a71874fed3d6..2eeb55010563 100644
> >>>>>>> --- a/drivers/pinctrl/mediatek/Kconfig
> >>>>>>> +++ b/drivers/pinctrl/mediatek/Kconfig
> >>>>>>> @@ -1,6 +1,6 @@
> >>>>>>>     # SPDX-License-Identifier: GPL-2.0-only
> >>>>>>>     menu "MediaTek pinctrl drivers"
> >>>>>>> -       depends on ARCH_MEDIATEK || COMPILE_TEST
> >>>>>>> +       depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST
> >>>>>>>
> >>>>>>>     config EINT_MTK
> >>>>>>>            tristate "MediaTek External Interrupt Support"
> >>>>>>> @@ -22,6 +22,12 @@ config PINCTRL_MTK
> >>>>>>>     config PINCTRL_MTK_V2
> >>>>>>>            tristate
> >>>>>>>
> >>>>>>> +config PINCTRL_MTK_MTMIPS
> >>>>>>> +       bool
> >>>>>>> +       depends on RALINK
> >>>>>>> +       select PINMUX
> >>>>>>> +       select GENERIC_PINCONF
> >>>>>>> +
> >>>>>>>     config PINCTRL_MTK_MOORE
> >>>>>>>            bool
> >>>>>>>            depends on OF
> >>>>>>> @@ -43,6 +49,49 @@ config PINCTRL_MTK_PARIS
> >>>>>>>            select OF_GPIO
> >>>>>>>            select PINCTRL_MTK_V2
> >>>>>>>
> >>>>>>> +# For MIPS SoCs
> >>>>>>> +config PINCTRL_MT7620
> >>>>>>> +       bool "MediaTek MT7620 pin control"
> >>>>>>> +       depends on SOC_MT7620 || COMPILE_TEST
> >>>>>>> +       depends on RALINK
> >>>>>>> +       default SOC_MT7620
> >>>>>>> +       select PINCTRL_MTK_MTMIPS
> >>>>>>> +
> >>>>>>> +config PINCTRL_MT7621
> >>>>>>> +       bool "MediaTek MT7621 pin control"
> >>>>>>> +       depends on SOC_MT7621 || COMPILE_TEST
> >>>>>>> +       depends on RALINK
> >>>>>>> +       default SOC_MT7621
> >>>>>>> +       select PINCTRL_MTK_MTMIPS
> >>>>>>> +
> >>>>>>> +config PINCTRL_MT76X8
> >>>>>>> +       bool "MediaTek MT76X8 pin control"
> >>>>>>> +       depends on SOC_MT7620 || COMPILE_TEST
> >>>>>>> +       depends on RALINK
> >>>>>>> +       default SOC_MT7620
> >>>>>>> +       select PINCTRL_MTK_MTMIPS
> >>>>>>> +
> >>>>>>> +config PINCTRL_RT2880
> >>>>>>> +       bool "Ralink RT2880 pin control"
> >>>>>>> +       depends on SOC_RT288X || COMPILE_TEST
> >>>>>>> +       depends on RALINK
> >>>>>>> +       default SOC_RT288X
> >>>>>>> +       select PINCTRL_MTK_MTMIPS
> >>>>>>> +
> >>>>>>> +config PINCTRL_RT305X
> >>>>>>> +       bool "Ralink RT305X pin control"
> >>>>>>> +       depends on SOC_RT305X || COMPILE_TEST
> >>>>>>> +       depends on RALINK
> >>>>>>> +       default SOC_RT305X
> >>>>>>> +       select PINCTRL_MTK_MTMIPS
> >>>>>>> +
> >>>>>>> +config PINCTRL_RT3883
> >>>>>>> +       bool "Ralink RT3883 pin control"
> >>>>>>> +       depends on SOC_RT3883 || COMPILE_TEST
> >>>>>>> +       depends on RALINK
> >>>>>>> +       default SOC_RT3883
> >>>>>>> +       select PINCTRL_MTK_MTMIPS
> >>>>>>> +
> >>>>>>
> >>>>>> I am not a Kconfig expert at all but...
> >>>>>>
> >>>>>> Should not all of these be depends on SOC_XXX || (COMPILE_TEST &&
> >>>>>> RALINK) and avoid the " depends on RALINK" next line in all of them?
> >>>>
> >>>> This seems to do the same thing but I'm following the "either change
> >>>> them all or fit into the crowd" ideology.
> >>>>
> >>>>>>
> >>>>>> Just asking since we have yet arch read and write register operations
> >>>>>> in pinctrl common ralink code. Having in this way, when we address
> >>>>>> this arch thing  in the next series just removing the "&& RALINK" part
> >>>>>> makes the review pretty obvious.
> >>>>
> >>>> You'd have to change RALINK with OF since we're still depending on that.
> >>>> RALINK selects OF by default so it's currently a hidden dependency.
> >>>>
> >>>>>>
> >>>>>> Other than that, changes look good to me.
> >>>>>
> >>>>> I think "depends on SOC_XXX || (COMPILE_TEST && MIPS)" would work also
> >>>>> and might be more accurate for compile testing targets.
> >>>
> >>> Are you sure? SOC_XXX here is already being enabled only if RALINK is
> >>> already enabled, right? [0]
> >>
> >> I'm not sure who's your reply to, or what it's about here.
> >
> > Bad insertion between lines, sorry :). I was just trying to explain to
> > you that SOC_RTXX ralink stuff is only available when RALINK is
> > already selected.
>
> Makes sense. However, I believe what I said below is still true. This
> option will be available to compile if a Ralink SoC (and therefore
> RALINK) is enabled, OR, COMPILE_TEST and MIPS is enabled. The latter
> will fail to compile if the enabled MIPS platform is not RALINK.
>
> >
> >>
> >>>
> >>>>
> >>>> This is not OK in both cases. If the driver is dependent on Ralink
> >>>> architecture code, choosing any other MIPS platform will make the driver
> >>>> available to compile, which will fail.
> >>>
> >>> SOC_XXX is already dependent on RALINK for real uses but the driver is
> >>> going to be selected for other MIPS platforms only for COMPILE_TEST
> >>> targets. Ideally drivers should be arch agnostic so can be selected
> >>> for any single arch build. Now we have arch dependent read and write
> >>> calls in the code, so you need the right headers to be properly found
> >>> to be able to compile testing. I think MIPS is enough dependency here
> >>> to properly find them. But if not, this should be (COMPILE_TEST &&
> >>> RALINK)
> >>
> >> I expect below to work without requiring the MIPS option.
> >>
> >> ifeq ($(CONFIG_COMPILE_TEST),y)
> >> CFLAGS_pinctrl-mtmips.o         += -I$(srctree)/arch/mips/include
> >> endif
> >
> > Yes, this will work but won't be necessary at all when we get rid of
> > ralink arch dependent code in the next series.
>
> Oh, you plan to completely get rid of it, including headers. That's better!

I'd really love to get rid of all of that, yes.

>
> However, rt305x_pinctrl_probe() on pinctrl-rt305x.c needs them to find
> out the SoC to match the pinmux data. Sure, splitting the driver further
> will work but I'm wondering if you've got something else in mind to
> address this.

I know. Sharing the same compatible string makes really hard to do
this easily. One of my thoughts was to split also that in the driver
as you are pointing out here. I have also submitted this series [0] to
be able to make use of soc_match stuff instead of relying on
compatible strings for these kinds of situations. However I am not
also sure that would be a valid approach. Let's see. At the end we can
end up splitting the driver if nothing seems to work.

Thanks,
    Sergio Paracuellos

[0]: https://lore.kernel.org/linux-mips/20230227105806.2394101-1-sergio.paracuellos@xxxxxxxxx/T/#t

>
> Arınç




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux