Re: [PATCH 2/3] soc: qcom: icc-bwmon: Handle global registers correctly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6.03.2023 13:09, Krzysztof Kozlowski wrote:
> On 06/03/2023 11:06, Konrad Dybcio wrote:
>>
>>
>> On 5.03.2023 16:06, Krzysztof Kozlowski wrote:
>>> On 04/03/2023 16:39, Konrad Dybcio wrote:
>>>> The BWMON hardware has two sets of registers: one for the monitor itself
>>>> and one called "global". It has what seems to be some kind of a head
>>>> switch and an interrupt control register. It's usually 0x200 in size.
>>>>
>>>> On fairly recent SoCs (with the starting point seemingly being moving
>>>> the OSM programming to the firmware) these two register sets are
>>>> contiguous and overlapping, like this (on sm8450):
>>>>
>>>> /* notice how base.start == global_base.start+0x100 */
>>>> reg = <0x90b6400 0x300>, <0x90b6300 0x200>;
>>>> reg-names = "base", "global_base";
>>>>
>>>> Which led to some confusion and the assumption that since the
>>>> "interesting" global registers begin right after global_base+0x100,
>>>> there's no need to map two separate regions and one can simply subtract
>>>> 0x100 from the offsets.
>>>>
>>>> This is however not the case for anything older than SDM845, as the
>>>> global region can appear in seemingly random spots on the register map.
>>>>
>>>> Add support for it to let bwmon function on older SoCs like MSM8998 and
>>>> allow operation with just one set of registers for newer platforms.
>>>>
>>>> Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver")
>>>
>>> You did not describe any bug to be fixed. Adding support for different
>>> devices with different memory layour is a feature, not bugfix. If this
>>> is a bugfix, please share what exactly is broken on sdm845?
>> The driver was completely broken for MSM8998, even though it
>> had a compatible specifically for that SoC.
> 
> That's still nothing to fix - msm8998 was added here only for
> compatibility reasons for bindings. It wasn't ever tested on MSM8998 and
> also probably never written in a way that it should work for MSM8998.
Don't you think making something like

compatible = "qcom,msm8998-bwmon"

not actually compatible with MSM8998 is a bit wrong?

 It
> could work, but that was not the intention. The driver is supposed to
> work on sdm845 and according to your description - there is nothing
> wrong with that.
> 
>>
>>>
>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>>>> ---
>>>>  drivers/soc/qcom/icc-bwmon.c | 136 +++++++++++++++++++++++++++++++++++++------
>>>>  1 file changed, 118 insertions(+), 18 deletions(-)
>>>>
>>>> diff --git a/drivers/soc/qcom/icc-bwmon.c b/drivers/soc/qcom/icc-bwmon.c
>>>> index d07be3700db6..9ef632d80ee3 100644
>>>> --- a/drivers/soc/qcom/icc-bwmon.c
>>>> +++ b/drivers/soc/qcom/icc-bwmon.c
>>>> @@ -34,14 +34,27 @@
>>>>  /* Internal sampling clock frequency */
>>>>  #define HW_TIMER_HZ				19200000
>>>>  
>>>> -#define BWMON_V4_GLOBAL_IRQ_CLEAR		0x008
>>>> -#define BWMON_V4_GLOBAL_IRQ_ENABLE		0x00c
>>>> +#define BWMON_V4_GLOBAL_IRQ_CLEAR		0x108
>>>> +#define BWMON_V4_GLOBAL_IRQ_ENABLE		0x10c
>>>>  /*
>>>>   * All values here and further are matching regmap fields, so without absolute
>>>>   * register offsets.
>>>>   */
>>>>  #define BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE	BIT(0)
>>>>  
>>>> +/*
>>>> + * Starting with SDM845, the BWMON4 register space has changed a bit:
>>>> + * the global registers were jammed into the beginning of the monitor region.
>>>> + * To keep the proper offsets, one would have to map <GLOBAL_BASE 0x200> and
>>>> + * <GLOBAL_BASE+0x100 0x300>, which is straight up wrong.
>>>> + * To facilitate for that, while allowing the older, arguably more proper
>>>> + * implementations to work, offset the global registers by -0x100 to avoid
>>>> + * having to map half of the global registers twice.
>>>> + */
>>>> +#define BWMON_V4_845_OFFSET			0x100
>>>
>>> MSM8998? It's a bit confusing to keep calling it 845 while it is for
>>> MSM8998 variant... or it's not anymore for MSM8998?
>> No, it's for 845 and up.
> 
> If it is for 845 and up, why then it is used for msm8998 in
> msm8998_bwmon_reg_noread_ranges?
Ouch, it should have never gotten there. msm8998_bwmon_global_reg_fields
uses the correct one.

> 
>>
>>>
>>>
>>>> +#define BWMON_V4_GLOBAL_IRQ_CLEAR_845		(BWMON_V4_GLOBAL_IRQ_CLEAR - BWMON_V4_845_OFFSET)
>>>> +#define BWMON_V4_GLOBAL_IRQ_ENABLE_845		(BWMON_V4_GLOBAL_IRQ_ENABLE - BWMON_V4_845_OFFSET)
>>>> +
>>>>  #define BWMON_V4_IRQ_STATUS			0x100
>>>>  #define BWMON_V4_IRQ_CLEAR			0x108
>>>>  
>>>> @@ -118,8 +131,10 @@
>>>>  #define BWMON_NEEDS_FORCE_CLEAR			BIT(1)
>>>>  
>>>>  enum bwmon_fields {
>>>> -	F_GLOBAL_IRQ_CLEAR,
>>>> -	F_GLOBAL_IRQ_ENABLE,
>>>> +	/* Fields used only on >=SDM845 with BWMON_HAS_GLOBAL_IRQ */
>>>> +	F_GLB_IRQ_CLEAR,
>>>> +	F_GLB_IRQ_ENABLE,
>>>
>>> I am not sure what's the benefit of this rename.
>> I need to somehow differentiate the members of enum bwmon_fields
>> and enum bwmon_global_fields, keeping the "_GLOBAL" in global_fields
>> seems to make the most sense, imo.
> 
> This complicates and makes code difficult to read. The entire driver was
> designed for single address space to make everything a bit simpler and
> easier to read, so any changes should not reduce this. Maybe just use
> the same defines?
I suppose that could work with some shuffling..

Or name the other fields MSM8998?
> 
>>
>>>
>>>> +
>>>>  	F_IRQ_STATUS,
>>>>  	F_IRQ_CLEAR,
>>>>  	F_IRQ_ENABLE,
>>>> @@ -145,6 +160,13 @@ enum bwmon_fields {
>>>>  	F_NUM_FIELDS
>>>>  };
>>>>  
>>>> +enum bwmon_global_fields {
>>>> +	F_GLOBAL_IRQ_CLEAR,
>>>> +	F_GLOBAL_IRQ_ENABLE,
>>>> +
>>>> +	F_NUM_GLOBAL_FIELDS
>>>> +};
>>>> +
>>>>  struct icc_bwmon_data {
>>>>  	unsigned int sample_ms;
>>>>  	unsigned int count_unit_kb; /* kbytes */
>>>> @@ -157,6 +179,9 @@ struct icc_bwmon_data {
>>>>  
>>>>  	const struct regmap_config *regmap_cfg;
>>>>  	const struct reg_field *regmap_fields;
>>>> +
>>>> +	const struct regmap_config *global_regmap_cfg;
>>>> +	const struct reg_field *global_regmap_fields;
>>>>  };
>>>>  
>>>>  struct icc_bwmon {
>>>> @@ -166,6 +191,7 @@ struct icc_bwmon {
>>>>  
>>>>  	struct regmap *regmap;
>>>>  	struct regmap_field *regs[F_NUM_FIELDS];
>>>> +	struct regmap_field *global_regs[F_NUM_FIELDS];
>>>>  
>>>>  	unsigned int max_bw_kbps;
>>>>  	unsigned int min_bw_kbps;
>>>> @@ -175,8 +201,8 @@ struct icc_bwmon {
>>>>  
>>>>  /* BWMON v4 */
>>>>  static const struct reg_field msm8998_bwmon_reg_fields[] = {
>>>> -	[F_GLOBAL_IRQ_CLEAR]	= REG_FIELD(BWMON_V4_GLOBAL_IRQ_CLEAR, 0, 0),
>>>> -	[F_GLOBAL_IRQ_ENABLE]	= REG_FIELD(BWMON_V4_GLOBAL_IRQ_ENABLE, 0, 0),
>>>> +	[F_GLB_IRQ_CLEAR]	= REG_FIELD(BWMON_V4_GLOBAL_IRQ_CLEAR_845, 0, 0),
>>>> +	[F_GLB_IRQ_ENABLE]	= REG_FIELD(BWMON_V4_GLOBAL_IRQ_ENABLE_845, 0, 0),
>>>>  	[F_IRQ_STATUS]		= REG_FIELD(BWMON_V4_IRQ_STATUS, 4, 7),
>>>>  	[F_IRQ_CLEAR]		= REG_FIELD(BWMON_V4_IRQ_CLEAR, 4, 7),
>>>>  	[F_IRQ_ENABLE]		= REG_FIELD(BWMON_V4_IRQ_ENABLE, 4, 7),
>>>> @@ -202,7 +228,7 @@ static const struct reg_field msm8998_bwmon_reg_fields[] = {
>>>>  };
>>>>  
>>>>  static const struct regmap_range msm8998_bwmon_reg_noread_ranges[] = {
>>>> -	regmap_reg_range(BWMON_V4_GLOBAL_IRQ_CLEAR, BWMON_V4_GLOBAL_IRQ_CLEAR),
>>>> +	regmap_reg_range(BWMON_V4_GLOBAL_IRQ_CLEAR_845, BWMON_V4_GLOBAL_IRQ_CLEAR_845),
>>>>  	regmap_reg_range(BWMON_V4_IRQ_CLEAR, BWMON_V4_IRQ_CLEAR),
>>>>  	regmap_reg_range(BWMON_V4_CLEAR, BWMON_V4_CLEAR),
>>>>  };
>>>> @@ -222,16 +248,34 @@ static const struct regmap_access_table msm8998_bwmon_reg_volatile_table = {
>>>>  	.n_yes_ranges	= ARRAY_SIZE(msm8998_bwmon_reg_volatile_ranges),
>>>>  };
>>>>  
>>>> +static const struct reg_field msm8998_bwmon_global_reg_fields[] = {
>>>> +	[F_GLOBAL_IRQ_CLEAR]	= REG_FIELD(BWMON_V4_GLOBAL_IRQ_CLEAR, 0, 0),
>>>> +	[F_GLOBAL_IRQ_ENABLE]	= REG_FIELD(BWMON_V4_GLOBAL_IRQ_ENABLE, 0, 0),
>>>> +};
>>>> +
>>>> +static const struct regmap_range msm8998_bwmon_global_reg_noread_ranges[] = {
>>>> +	regmap_reg_range(BWMON_V4_GLOBAL_IRQ_CLEAR, BWMON_V4_GLOBAL_IRQ_CLEAR),
>>>> +};
>>>> +
>>>> +static const struct regmap_access_table msm8998_bwmon_global_reg_read_table = {
>>>> +	.no_ranges	= msm8998_bwmon_global_reg_noread_ranges,
>>>> +	.n_no_ranges	= ARRAY_SIZE(msm8998_bwmon_global_reg_noread_ranges),
>>>> +};
>>>> +
>>>>  /*
>>>>   * Fill the cache for non-readable registers only as rest does not really
>>>>   * matter and can be read from the device.
>>>>   */
>>>>  static const struct reg_default msm8998_bwmon_reg_defaults[] = {
>>>> -	{ BWMON_V4_GLOBAL_IRQ_CLEAR, 0x0 },
>>>> +	{ BWMON_V4_GLOBAL_IRQ_CLEAR_845, 0x0 },
>>>>  	{ BWMON_V4_IRQ_CLEAR, 0x0 },
>>>>  	{ BWMON_V4_CLEAR, 0x0 },
>>>>  };
>>>>  
>>>> +static const struct reg_default msm8998_bwmon_global_reg_defaults[] = {
>>>> +	{ BWMON_V4_GLOBAL_IRQ_CLEAR, 0x0 },
>>>> +};
>>>> +
>>>>  static const struct regmap_config msm8998_bwmon_regmap_cfg = {
>>>>  	.reg_bits		= 32,
>>>>  	.reg_stride		= 4,
>>>> @@ -252,10 +296,27 @@ static const struct regmap_config msm8998_bwmon_regmap_cfg = {
>>>>  	.cache_type		= REGCACHE_RBTREE,
>>>>  };
>>>>  
>>>> +static const struct regmap_config msm8998_bwmon_global_regmap_cfg = {
>>>> +	.reg_bits		= 32,
>>>> +	.reg_stride		= 4,
>>>> +	.val_bits		= 32,
>>>> +	/*
>>>> +	 * No concurrent access expected - driver has one interrupt handler,
>>>> +	 * regmap is not shared, no driver or user-space API.
>>>> +	 */
>>>> +	.disable_locking	= true,
>>>> +	.rd_table		= &msm8998_bwmon_global_reg_read_table,
>>>> +	.reg_defaults		= msm8998_bwmon_global_reg_defaults,
>>>> +	.num_reg_defaults	= ARRAY_SIZE(msm8998_bwmon_global_reg_defaults),
>>>> +	/*
>>>> +	 * Cache is necessary for using regmap fields with non-readable
>>>> +	 * registers.
>>>> +	 */
>>>> +	.cache_type		= REGCACHE_RBTREE,
>>>> +};
>>>> +
>>>>  /* BWMON v5 */
>>>>  static const struct reg_field sdm845_llcc_bwmon_reg_fields[] = {
>>>> -	[F_GLOBAL_IRQ_CLEAR]	= {},
>>>> -	[F_GLOBAL_IRQ_ENABLE]	= {},
>>>>  	[F_IRQ_STATUS]		= REG_FIELD(BWMON_V5_IRQ_STATUS, 0, 3),
>>>>  	[F_IRQ_CLEAR]		= REG_FIELD(BWMON_V5_IRQ_CLEAR, 0, 3),
>>>>  	[F_IRQ_ENABLE]		= REG_FIELD(BWMON_V5_IRQ_ENABLE, 0, 3),
>>>> @@ -369,16 +430,21 @@ static void bwmon_clear_irq(struct icc_bwmon *bwmon)
>>>>  	regmap_field_force_write(bwmon->regs[F_IRQ_CLEAR], BWMON_IRQ_ENABLE_MASK);
>>>>  	if (bwmon->data->quirks & BWMON_NEEDS_FORCE_CLEAR)
>>>>  		regmap_field_force_write(bwmon->regs[F_IRQ_CLEAR], 0);
>>>> -	if (bwmon->data->quirks & BWMON_HAS_GLOBAL_IRQ)
>>>> -		regmap_field_force_write(bwmon->regs[F_GLOBAL_IRQ_CLEAR],
>>>> +	if (bwmon->global_regs[0])
>>>> +		regmap_field_force_write(bwmon->global_regs[F_GLOBAL_IRQ_CLEAR],
>>>> +					 BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
>>>> +	else
>>>> +		regmap_field_force_write(bwmon->regs[F_GLB_IRQ_CLEAR],
>>>>  					 BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
>>>>  }
>>>>  
>>>>  static void bwmon_disable(struct icc_bwmon *bwmon)
>>>>  {
>>>>  	/* Disable interrupts. Strict ordering, see bwmon_clear_irq(). */
>>>> -	if (bwmon->data->quirks & BWMON_HAS_GLOBAL_IRQ)
>>>> -		regmap_field_write(bwmon->regs[F_GLOBAL_IRQ_ENABLE], 0x0);
>>>> +	if (bwmon->global_regs[0])
>>>> +		regmap_field_write(bwmon->global_regs[F_GLOBAL_IRQ_ENABLE], 0x0);
>>>> +	else
>>>> +		regmap_field_write(bwmon->regs[F_GLB_IRQ_ENABLE], 0x0);
>>>>  	regmap_field_write(bwmon->regs[F_IRQ_ENABLE], 0x0);
>>>>  
>>>>  	/*
>>>> @@ -391,9 +457,13 @@ static void bwmon_disable(struct icc_bwmon *bwmon)
>>>>  static void bwmon_enable(struct icc_bwmon *bwmon, unsigned int irq_enable)
>>>>  {
>>>>  	/* Enable interrupts */
>>>> -	if (bwmon->data->quirks & BWMON_HAS_GLOBAL_IRQ)
>>>> -		regmap_field_write(bwmon->regs[F_GLOBAL_IRQ_ENABLE],
>>>> -				   BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
>>>> +	if (bwmon->global_regs[0])
>>>> +		regmap_field_write(bwmon->global_regs[F_GLOBAL_IRQ_ENABLE],
>>>> +					 BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
>>>> +	else
>>>> +		regmap_field_write(bwmon->regs[F_GLB_IRQ_ENABLE],
>>>> +					 BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
>>>
>>> Probably this would be more readable if regmap_field_write() is called
>>> only once and you parametrize the first argument (field) from the
>>> 'struct bwmon'.
>> Sounds good
>>
>>>
>>>> +
>>>>  	regmap_field_write(bwmon->regs[F_IRQ_ENABLE], irq_enable);
>>>>  
>>>>  	/* Enable bwmon */
>>>> @@ -556,7 +626,9 @@ static int bwmon_init_regmap(struct platform_device *pdev,
>>>>  	struct device *dev = &pdev->dev;
>>>>  	void __iomem *base;
>>>>  	struct regmap *map;
>>>> +	int ret;
>>>>  
>>>> +	/* Map the monitor base */
>>>>  	base = devm_platform_ioremap_resource(pdev, 0);
>>>>  	if (IS_ERR(base))
>>>>  		return dev_err_probe(dev, PTR_ERR(base),
>>>> @@ -567,12 +639,38 @@ static int bwmon_init_regmap(struct platform_device *pdev,
>>>>  		return dev_err_probe(dev, PTR_ERR(map),
>>>>  				     "failed to initialize regmap\n");
>>>>  
>>>> +	BUILD_BUG_ON(ARRAY_SIZE(msm8998_bwmon_global_reg_fields) != F_NUM_GLOBAL_FIELDS);
>>>>  	BUILD_BUG_ON(ARRAY_SIZE(msm8998_bwmon_reg_fields) != F_NUM_FIELDS);
>>>>  	BUILD_BUG_ON(ARRAY_SIZE(sdm845_llcc_bwmon_reg_fields) != F_NUM_FIELDS);
>>>>  
>>>> -	return devm_regmap_field_bulk_alloc(dev, map, bwmon->regs,
>>>> +	ret = devm_regmap_field_bulk_alloc(dev, map, bwmon->regs,
>>>>  					   bwmon->data->regmap_fields,
>>>>  					   F_NUM_FIELDS);
>>>
>>> What exactly happens now on msm8998 (or updated sdm845 from your binding
>>> example) for the "global" fields in this region? The regmap references
>>> non-existing fields for the "monitor" region, doesn't it?
>> That's correct, the regmap references 3 non-existstent (or at least
>> not-what-we-think-they-are registers (ending with _845) for
>> targets with two separate regions (such as MSM8998), but they're
>> unaccessed if the "global" region has been mapped sucessfully
>> [see `if (bwmon->global_regs[0])`].
>>
>>>
>>>> +	if (ret)
>>>> +		return ret;
>>>> +
>>>> +	if (bwmon->data->quirks & BWMON_HAS_GLOBAL_IRQ) {
>>>> +		/* Map the global base, if separate */
>>>> +		base = devm_platform_ioremap_resource(pdev, 1);
>>>
>>> Wouldn't this now print errors for sdm845, thus introduce dmesg regression?
>> I explicitly stated this in the cover letter and asked for opinions.
>>
> 
> Sorry, long time ago I stopped reading cover letters, maybe except it's
> top few sentences. Just too many of them and too much of text usually
> useless. Commits should describe everything as they go to the Git and
> they should justify their own existence.
> 
> Anyway, above dmesg error regression is a no. The devices turn out not
> to be compatible with each other so just adjust the bindings and match
> each driver by proper compatible string.
So what am I supposed to do here? Add "qcom,msm8998-actual-msm8998-bwmon"?

Otherwise, changing msm8998 data would break 845-8550, unless I added all
of them to a separate match table. Or I can add some boilerplate C code
that would not throw a warning, or perhaps try and introduce
devm_platform_ioremap_resource_optional..

I guess the last option sounds the best.

Konrad
> 
> Best regards,
> Krzysztof
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux