[PATCH v3 1/3] arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts

[Christian Hewitt <christianshewitt@xxxxxxxxx>]

Alpha-sort the nodes, move the default line in the LED node to where it's
normally found, and remove excess spacing. No functional changes.

Signed-off-by: Christian Hewitt <christianshewitt@xxxxxxxxx>
Tested-by: Ferass El Hafidi <vitali64pmemail@xxxxxxxxxxxxxx>
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 31 ++++++++-----------
 1 file changed, 13 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 5f2d4317ecfb..73ad0f5110f3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -6,10 +6,10 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+
 / {
 	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
@@ -18,9 +18,9 @@ leds {
 		compatible = "gpio-leds";
 		led {
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
+			default-state = "off";
 		};
 	};
 
@@ -34,24 +34,8 @@ button-reset {
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
 };
 
-
-
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm4335a0";
-	};
-};
-
-
-
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rmii_pins>;
@@ -78,3 +62,14 @@ eth_phy0: ethernet-phy@0 {
 &ir {
 	linux,rc-map-name = "rc-videostrong-kii-pro";
 };
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+	};
+};
-- 
2.34.1