Re: [PATCH 1/3] dt-bindings: interconnect: qcom,msm8998-bwmon: Add global registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 5.03.2023 15:52, Krzysztof Kozlowski wrote:
> On 04/03/2023 16:39, Konrad Dybcio wrote:
>> The BWMON has two sets of registers: one for handling the monitor itself
>> and one called "global", which we didn't care about before, as on newer
>> SoCs it was made contiguous with (but not the same as) the monitor's
>> register range. Describe it.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>> ---
>>  .../bindings/interconnect/qcom,msm8998-bwmon.yaml  | 28 ++++++++++++++++++----
>>  1 file changed, 24 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
>> index 12a0d3ecbabb..6dd0cb0a1f43 100644
>> --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
>> +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
>> @@ -49,9 +49,13 @@ properties:
>>      type: object
>>  
>>    reg:
>> -    # BWMON v4 (currently described) and BWMON v5 use one register address
>> -    # space.  BWMON v2 uses two register spaces - not yet described.
>> -    maxItems: 1
>> +    # BWMON v5 uses one register address space, v1-v4 use one or two.
>> +    minItems: 1
>> +    maxItems: 2
>> +
>> +  reg-names:
>> +    minItems: 1
>> +    maxItems: 2
>>  
>>  required:
>>    - compatible
>> @@ -63,6 +67,21 @@ required:
>>  
>>  additionalProperties: false
>>  
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          const: qcom,msm8998-bwmon
>> +    then:
>> +      properties:
>> +        reg:
>> +          minItems: 2
>> +
>> +        reg-names:
>> +          items:
>> +            - const: monitor
>> +            - const: global
> 
> else:
>   reg:
>     maxItems: 1
> 
> and either disallow reg-names or move it to the top-level.
Disallowing makes more sense in this case imo, will do.

> 
>> +
>>  examples:
>>    - |
>>      #include <dt-bindings/interconnect/qcom,sdm845.h>
>> @@ -70,7 +89,8 @@ examples:
>>  
>>      pmu@1436400 {
>>          compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon";
>> -        reg = <0x01436400 0x600>;
>> +        reg = <0x01436400 0x600>, <0x01436300 0x200>;
> 
> That's not correct for sdm845. It's only one address space for sdm845.
Ack, leftover from an old version again..

Konrad
> 
> 
> Best regards,
> Krzysztof
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux